John Deere 6820 or Massey Ferguson MF 5475 (A)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 6820 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 5475 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The John Deere 6820 suits road haulage better on this data: 25% (2,100 kg / 4,630 lb) more maximum permissible mass.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for John Deere 6820 and Massey Ferguson MF 5475 (A), with the call on each
Question6820MF 5475 (A)Call
Which puts more power through the PTO shaft?99.4 kW (133.3 hp)Traktorenlexikon, “John Deere 6820”99.4 kW (133.3 hp)Traktorenlexikon, “Massey Ferguson MF 5475”Not comparableNot comparable on power at the PTO shaft: the 6820 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 5475 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 6820 and the MF 5475 (A).
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 6820 and the MF 5475 (A).
Which pumps more oil for implements?109.8 L/min (29.0 gpm)Traktorenlexikon, “Massey Ferguson MF 5475”No figureNo call on hydraulic flow: no figure on record for the 6820.
Which lifts more on the three-point hitch?8,570 kg (18,894 lb)Traktorenlexikon, “John Deere 6820”No figureNo call on three-point lift: no figure on record for the MF 5475 (A).
Which is heavier, for traction?6,330 kg (13,955 lb) to 6,405 kg (14,121 lb)Traktorenlexikon, “John Deere 6820”4,495 kg (9,910 lb)Traktorenlexikon, “Massey Ferguson MF 5475”Ahead (a fact, not an advantage)The John Deere 6820 is 41% heavier (1,835 kg / 4,045 lb) than the Massey Ferguson MF 5475 (A) (both unladen weight, as stated by the source).
Which may carry more ballast and load?10,500 kg (23,149 lb)Traktorenlexikon, “John Deere 6820”8,400 kg (18,519 lb)Traktorenlexikon, “Massey Ferguson MF 5475”AheadThe John Deere 6820 has 25% higher maximum permissible mass (2,100 kg / 4,630 lb) than the Massey Ferguson MF 5475 (A) (both maximum permissible mass, as stated by the source).
Which has the wider choice of gears?20 to 32Traktorenlexikon, “John Deere 6820”16Traktorenlexikon, “Massey Ferguson MF 5475”EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 6820 and the MF 5475 (A).
Which is faster on the road?40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “John Deere 6820”40 km/h (24.9 mph)Traktorenlexikon, “Massey Ferguson MF 5475”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540 rpm / 1000 rpmTraktorenlexikon, “John Deere 6820”540 rpm / 1000 rpmTraktorenlexikon, “Massey Ferguson MF 5475”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?No figureNo call on PTO independence: not stated for the 6820 and the MF 5475 (A).
Which drives on both axles?4WDTraktorenlexikon, “John Deere 6820”2WD / 4WDTraktorenlexikon, “Massey Ferguson MF 5475”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?2002–20072007–2012Ahead (a fact, not an advantage)The Massey Ferguson MF 5475 (A) is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The John Deere 6820 is 41% heavier (1,835 kg / 4,045 lb) than the Massey Ferguson MF 5475 (A) (both unladen weight, as stated by the source).
  • The John Deere 6820 has 25% higher maximum permissible mass (2,100 kg / 4,630 lb) than the Massey Ferguson MF 5475 (A) (both maximum permissible mass, as stated by the source).
  • The Massey Ferguson MF 5475 (A) is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the 6820 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 5475 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, three-point lift, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources