John Deere 6820 vs Massey Ferguson MF 5475 (A)
7 material differences · fewer than 12
Which should you choose?
Read our verdict on the 6820 and the MF 5475 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | 6820 | MF 5475 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 133.3 hp | 133.3 hp | — |
| Engine declared | John Deere PowrTech 6.068 HLA-071/V2 or 6.068 HL-472/V4 | Perkins 1106 D-E 60 TA | differs |
| Displacement declared | 6.79 L | 6.60 L | — |
| Transmission | |||
| Top speed declared | 24.9–31.1 mph · 40–50 km/h | 24.9 mph · 40 km/h | differs |
| Clutch declared | — | Driving clutch with 5 by 172.5 mm disc diameter | — |
| Hydraulics & hitch | |||
| Hydraulic control declared | Load sensing | Load sensing | — |
| Pump flow declared | — | 29.0 gpm · 109.8 L/min | — |
| Three-point lift at ends declared | 18,894 lb · 8,570 kg | — | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540 rpm / 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 13,955–14,121 lb · 6,330–6,405 kg | 9,910 lb · 4,495 kg | differs |
| Maximum permissible mass declared | 23,149 lb · 10,500 kg | 18,519 lb · 8,400 kg | +25% 6820 |
| Wheelbase declared | 104.3 in · 2,650 mm | 109.4 in · 2,780 mm | — |
| Length declared | 186.2 in · 4,730 mm | 122.9 in · 3,122 mm | +52% 6820 |
| Width declared | 96.5 in · 2,450 mm | 78.4 in · 1,991 mm | +23% 6820 |
| Height declared | 115.4 in · 2,930 mm | 111.0 in · 2,820 mm | — |
| Ground clearance declared | 21.6 in · 549 mm | 15.4 in · 390 mm | +41% 6820 |
| Fuel tank declared | 218.7 qt · 207.0 L | — | — |
John Deere 6820 sources
Source
- Source: Traktorenlexikon, “John Deere 6820”
Massey Ferguson MF 5475 (A) sources
Source
- Source: Traktorenlexikon, “Massey Ferguson MF 5475”