John Deere 6520 vs New Holland TM 125 (Traktorenlexikon)

7 material differences · fewer than 12

Tractor one

2002–2007

No measured PTO figure

Tractor two

1999–2002

No measured PTO figure

Which should you choose?

Read our verdict on the 6520 and the TM 125 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 7 fields identical or within 5%, which is not counted as material

John Deere 6520 and New Holland TM 125 (Traktorenlexikon), field by field
Field	6520	TM 125	Gap
Engine
Engine power, claimed claimed	113.5 hp	113.5 hp	—
Engine declared	John Deere PowrTech 6.068 HLA-V2 or 6.068 HL-4V/CR	NEW HOLLAND 675-T/WS	differs
Displacement declared	6.79 L	7.48 L	+10% TM 125
Maximum torque declared	—	372 lb·ft · 504 N·m	—
Transmission
Top speed declared	24.9–31.1 mph · 40–50 km/h	24.9 mph · 40 km/h	differs
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	—	30.9 gpm · 116.9 L/min	—
Pressure declared	—	2,466 psi · 170 bar	—
Three-point lift at ends declared	14,881 lb · 6,750 kg	14,462 lb · 6,560 kg	—
Rear PTO speeds declared	540E/540/1000 rpm	540/540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	11,199–11,773 lb · 5,080–5,340 kg	11,766 lb · 5,337 kg	—
Maximum permissible mass declared	18,739 lb · 8,500 kg	18,739 lb · 8,500 kg	—
Wheelbase declared	104.3 in · 2,650 mm	107.2 in · 2,723 mm	—
Length declared	186.1 in · 4,728 mm	184.1 in · 4,675 mm	—
Width declared	91.2 in · 2,316 mm	84.6 in · 2,150 mm	+8% 6520
Height declared	112.5 in · 2,858 mm	115.2 in · 2,926 mm	—
Ground clearance declared	22.4 in · 570 mm	14.4 in · 365 mm	+56% 6520
Turning radius, braked declared	—	14.8 ft · 4.52 m	—
Fuel tank declared	218.7 qt · 207.0 L	343.4 qt · 325.0 L	+57% TM 125

Source

Source