John Deere 6410 vs New Holland T 6020 Delta (Traktorenlexikon)

9 material differences · fewer than 12

Tractor one

1997–2003

98.0 hp

Measured at the PTO · OECD Test 1806

Tractor two

2007–2012

No measured PTO figure

Which should you choose?

Read our verdict on the 6410 and the T 6020 Delta → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 5 fields identical or within 5%, which is not counted as material

John Deere 6410 and New Holland T 6020 Delta (Traktorenlexikon), field by field
Field	6410	T 6020 Delta	Gap
Measured performance
PTO power, measured measured	98.0 hp	—	—
Drawbar power, measured measured	79.7 hp	—	—
Engine
Engine power, claimed claimed	—	110.5 hp	—
Engine declared	John Deere 4045TL056	IVECO-NEF F 4 GE 9484 D (TIER-III)	differs
Displacement declared	4.53 L	4.49 L	—
Maximum torque declared	307 lb·ft · 416.0 N·m	393 lb·ft · 533 N·m	+28% T 6020 Delta
Transmission
Top speed declared	18.6–31.1 mph · 30–50 km/h	24.9 mph · 40 km/h	differs
Clutch declared	—	Pedal-operated dry single-disc clutch	—
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Hydraulic control declared	Load sensing	—	—
Pressure declared	3,017–3,220 psi · 208–222 bar	—	—
Three-point lift at ends declared	13,264 lb · 6,016 kg	13,221 lb · 5,997 kg	—
Rear PTO speeds declared	540E/540/1000 rpm	540/540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	9,039–9,678 lb · 4,100–4,390 kg	10,406 lb · 4,720 kg	differs
Maximum permissible mass declared	17,637 lb · 8,000 kg	19,842 lb · 9,000 kg	+13% T 6020 Delta
Wheelbase declared	95.7 in · 2,430 mm	95.0 in · 2,412 mm	—
Length declared	181.5 in · 4,610 mm	194.9 in · 4,950 mm	+7% T 6020 Delta
Width declared	87.4 in · 2,220 mm	89.8 in · 2,280 mm	—
Height declared	106.1 in · 2,694 mm	110.4 in · 2,805 mm	—
Ground clearance declared	17.2 in · 436 mm	18.8 in · 478 mm	+10% T 6020 Delta
Fuel tank declared	195.5 qt · 185.0 L	160.6–186.0 qt · 152.0–176.0 L	differs

Source

Source