John Deere 6410 vs New Holland T 5070

10 material differences · fewer than 12

Tractor one

1997–2003

98.0 hp

Measured at the PTO · OECD Test 1806

Tractor two

2009–2012

No measured PTO figure

Which should you choose?

Read our verdict on the 6410 and the T 5070 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

John Deere 6410 and New Holland T 5070, field by field
Field	6410	T 5070	Gap
Measured performance
PTO power, measured measured	98.0 hp	—	—
Drawbar power, measured measured	79.7 hp	—	—
Engine
Engine power, claimed claimed	—	111.4 hp	—
Engine declared	John Deere 4045TL056	IVECO-NEF F4CE 9484	differs
Displacement declared	4.53 L	4.49 L	—
Maximum torque declared	307 lb·ft · 416.0 N·m	347 lb·ft · 471 N·m	+13% T 5070
Transmission
Top speed declared	18.6–31.1 mph · 30–50 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	—	electrohydraulically operated wet multi-plate clutch	—
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Hydraulic control declared	Load sensing	—	—
Pump flow declared	—	17.2 gpm · 65.0 L/min	—
Pressure declared	3,017–3,220 psi · 208–222 bar	3,336 psi · 230 bar	differs
Three-point lift at ends declared	13,264 lb · 6,016 kg	12,655 lb · 5,740 kg	—
Rear PTO speeds declared	540E/540/1000 rpm	540/540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	9,039–9,678 lb · 4,100–4,390 kg	9,480 lb · 4,300 kg	—
Maximum permissible mass declared	17,637 lb · 8,000 kg	16,314 lb · 7,400 kg	+8% 6410
Wheelbase declared	95.7 in · 2,430 mm	92.5 in · 2,350 mm	—
Length declared	181.5 in · 4,610 mm	162.2 in · 4,120 mm	+12% 6410
Width declared	87.4 in · 2,220 mm	84.2 in · 2,138 mm	—
Height declared	106.1 in · 2,694 mm	99.8 in · 2,536 mm	+6% 6410
Ground clearance declared	17.2 in · 436 mm	19.2 in · 488 mm	+12% T 5070
Fuel tank declared	195.5 qt · 185.0 L	176.5 qt · 167.0 L	+11% 6410

Source

Source