10 material differences · fewer than 12
Tractor oneJohn Deere 64101997–200398.0 hpMeasured at the PTO · OECD Test 1806Tractor twoMassey Ferguson MF 4365 (A)2002–2003No measured PTO figure
Which should you choose?
Read our verdict on the 6410 and the MF 4365 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 6410 | MF 4365 (A) | Gap |
|---|---|---|---|
| Measured performance | |||
| PTO power, measured measured | 98.0 hp | — | — |
| Drawbar power, measured measured | 79.7 hp | — | — |
| Engine | |||
| Engine power, claimed claimed | — | 110.5 hp | — |
| Engine declared | John Deere 4045TL056 | Perkins 1004.4 TI | differs |
| Displacement declared | 4.53 L | 3.99 L | +13% 6410 |
| Maximum torque declared | 307 lb·ft · 416.0 N·m | 325 lb·ft · 440 N·m | +6% MF 4365 (A) |
| Transmission | |||
| Top speed declared | 18.6–31.1 mph · 30–50 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | — | Pedal-operated dry and air-cooled single-disc clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Hydraulic control declared | Load sensing | — | — |
| Pump flow declared | — | 15.8 gpm · 59.9 L/min | — |
| Pressure declared | 3,017–3,220 psi · 208–222 bar | 3,104–3,481 psi · 214–240 bar | differs |
| Rear PTO speeds declared | 540E/540/1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 9,039–9,678 lb · 4,100–4,390 kg | 7,780 lb · 3,529 kg | differs |
| Maximum permissible mass declared | 17,637 lb · 8,000 kg | 17,350 lb · 7,870 kg | — |
| Wheelbase declared | 95.7 in · 2,430 mm | 92.5 in · 2,350 mm | — |
| Length declared | 181.5 in · 4,610 mm | 163.0 in · 4,140 mm | +11% 6410 |
| Width declared | 87.4 in · 2,220 mm | 80.7 in · 2,050 mm | +8% 6410 |
| Ground clearance declared | 17.2 in · 436 mm | 16.9 in · 430 mm | — |
| Fuel tank declared | 195.5 qt · 185.0 L | 134.2–213.5 qt · 127.0–202.0 L | differs |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
John Deere 6410 sources
- Source: OECD test report 1806, 1999
- Source: OECD test report 1842, 1999
- Source: Traktorenlexikon, “John Deere 6410”
Massey Ferguson MF 4365 (A) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 4365”