11 material differences · fewer than 12
Tractor oneJohn Deere 64101997–200398.0 hpMeasured at the PTO · OECD Test 1806Tractor twoMassey Ferguson MF 4360 (A)2001–2002No measured PTO figure
Which should you choose?
Read our verdict on the 6410 and the MF 4360 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | 6410 | MF 4360 (A) | Gap |
|---|---|---|---|
| Measured performance | |||
| PTO power, measured measured | 98.0 hp | — | — |
| Drawbar power, measured measured | 79.7 hp | — | — |
| Engine | |||
| Engine power, claimed claimed | — | 105 hp | — |
| Engine declared | John Deere 4045TL056 | Perkins 1006.60 | differs |
| Displacement declared | 4.53 L | 5.99 L | +32% MF 4360 (A) |
| Maximum torque declared | 307 lb·ft · 416.0 N·m | 286 lb·ft · 388 N·m | +7% 6410 |
| Transmission | |||
| Top speed declared | 18.6–31.1 mph · 30–50 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Hydraulic control declared | Load sensing | — | — |
| Pump flow declared | — | 19.1 gpm · 72.3 L/min | — |
| Pressure declared | 3,017–3,220 psi · 208–222 bar | — | — |
| Rear PTO speeds declared | 540E/540/1000 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 9,039–9,678 lb · 4,100–4,390 kg | 8,534 lb · 3,871 kg | differs |
| Maximum permissible mass declared | 17,637 lb · 8,000 kg | 20,503 lb · 9,300 kg | +16% MF 4360 (A) |
| Wheelbase declared | 95.7 in · 2,430 mm | 102.8 in · 2,610 mm | +7% MF 4360 (A) |
| Length declared | 181.5 in · 4,610 mm | 173.6 in · 4,410 mm | — |
| Width declared | 87.4 in · 2,220 mm | 80.7 in · 2,050 mm | +8% 6410 |
| Ground clearance declared | 17.2 in · 436 mm | 18.9 in · 480 mm | +10% MF 4360 (A) |
| Fuel tank declared | 195.5 qt · 185.0 L | 213.5 qt · 202.0 L | +9% MF 4360 (A) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
John Deere 6410 sources
- Source: OECD test report 1806, 1999
- Source: OECD test report 1842, 1999
- Source: Traktorenlexikon, “John Deere 6410”
Massey Ferguson MF 4360 (A) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 4360”