John Deere 6410 vs Lamborghini Premium 1050 DT

11 material differences · fewer than 12

Tractor one

1997–2003

98.0 hp

Measured at the PTO · OECD Test 1806

Tractor two

1992–2005

No measured PTO figure

Which should you choose?

Read our verdict on the 6410 and the Premium 1050 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 3 fields identical or within 5%, which is not counted as material

John Deere 6410 and Lamborghini Premium 1050 DT, field by field
Field	6410	Premium 1050 DT	Gap
Measured performance
PTO power, measured measured	98.0 hp	—	—
Drawbar power, measured measured	79.7 hp	—	—
Engine
Engine declared	John Deere 4045TL056	SAME H-1000.4 WTI	differs
Displacement declared	4.53 L	4.00 L	+13% 6410
Maximum torque declared	307 lb·ft · 416.0 N·m	271 lb·ft · 368 N·m	+13% 6410
Transmission
Top speed declared	18.6–31.1 mph · 30–50 km/h	24.9 mph · 40 km/h	differs
Clutch declared	—	pedal-operated dry organic S.L.H. single-plate clutch	—
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Hydraulic control declared	Load sensing	—	—
Pump flow declared	—	13.6 gpm · 51.4 L/min	—
Pressure declared	3,017–3,220 psi · 208–222 bar	—	—
Three-point lift at ends declared	13,264 lb · 6,016 kg	7,937 lb · 3,600 kg	+67% 6410
Rear PTO speeds declared	540E/540/1000 rpm	540/1000/540E/1000E rpm	differs
Weight & dimensions
Unladen weight declared	9,039–9,678 lb · 4,100–4,390 kg	9,634 lb · 4,370 kg	differs
Maximum permissible mass declared	17,637 lb · 8,000 kg	13,228 lb · 6,000 kg	+33% 6410
Wheelbase declared	95.7 in · 2,430 mm	93.4 in · 2,373 mm	—
Length declared	181.5 in · 4,610 mm	149.2 in · 3,790 mm	+22% 6410
Width declared	87.4 in · 2,220 mm	72.4 in · 1,840 mm	+21% 6410
Height declared	106.1 in · 2,694 mm	106.7 in · 2,710 mm	—
Ground clearance declared	17.2 in · 436 mm	17.9 in · 455 mm	—
Turning radius, braked declared	—	11.4 ft · 3.46 m	—
Fuel tank declared	195.5 qt · 185.0 L	158.5 qt · 150.0 L	+23% 6410

Source

Source