15 material differences
Tractor oneJohn Deere 5425 (A)2005–2008No measured PTO figureTractor twoZETOR 86411999–2002No measured PTO figure
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (42%); they were not built in overlapping years (2005–2008; 1999–2002). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
15 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 5425 (A) | 8641 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 79.9 hp | 79.9 hp | — |
| Engine declared | John Deere-PowerTech 4.045 T 40 | ZETOR Z-1203 | differs |
| Displacement declared | 4.52 L | 4.16 L | +9% 5425 (A) |
| Maximum torque declared | 208 lb·ft · 282 N·m | 230 lb·ft · 312 N·m | +11% 8641 |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6–24.9 mph · 30–40 km/h | — |
| Clutch declared | Pedal operated dry double clutch | Pedal-operated dry Zetor single-disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 18.7 gpm · 70.8 L/min | 15.1 gpm · 57.0 L/min | +24% 5425 (A) |
| Pressure declared | 3,408 psi · 235 bar | 1,813 psi · 125 bar | +88% 5425 (A) |
| Three-point lift, at the coupling points declared | 4,685 lb · 2,125 kg | 12,456 lb · 5,650 kg | +166% 8641 |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,799 lb · 3,084 kg | 9,678 lb · 4,390 kg | +42% 8641 |
| Maximum permissible mass declared | — | 14,771 lb · 6,700 kg | — |
| Wheelbase declared | 85.7 in · 2,178 mm | 94.0 in · 2,388 mm | +10% 8641 |
| Length declared | 151.5 in · 3,848 mm | 189.6 in · 4,815 mm | +25% 8641 |
| Width declared | 74.1 in · 1,882 mm | 80.7–89.6 in · 2,050–2,275 mm | differs |
| Height, over the cab declared | 98.6 in · 2,504 mm | 106.9 in · 2,715 mm | +8% 8641 |
| Ground clearance declared | 18.5 in · 470 mm | 13.4 in · 340 mm | +38% 5425 (A) |
| Turning radius, braked declared | 10.2 ft · 3.10 m | — | — |
| Fuel tank declared | 100.0 qt · 94.6 L | 190.2 qt · 180.0 L | +90% 8641 |
John Deere 5425 (A) sources
Source
- Source: Traktorenlexikon, “John Deere 5425”
ZETOR 8641 sources
Source
- Source: Traktorenlexikon, “Zetor 8641 (1999-2002)”