10 material differences · fewer than 12
Tractor oneJohn Deere 5425 (A)2005–2008No measured PTO figureTractor twoLamborghini 775-85 (DT)2004–2007No measured PTO figure
Which should you choose?
Read our verdict on the 5425 (A) and the 775-85 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 5425 (A) | 775-85 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 79.9 hp | 79.9 hp | — |
| Engine declared | John Deere-PowerTech 4.045 T 40 | SAME 1000.4 W 1 (Tier-II) | differs |
| Displacement declared | 4.52 L | 4.00 L | +13% 5425 (A) |
| Maximum torque declared | 208 lb·ft · 282 N·m | 186 lb·ft · 252 N·m | +12% 5425 (A) |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6–24.9 mph · 30–40 km/h | — |
| Clutch declared | Pedal operated dry double clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | 18.7 gpm · 70.8 L/min | 11.9 gpm · 45.0 L/min | +57% 5425 (A) |
| Pressure declared | 3,408 psi · 235 bar | — | — |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,799 lb · 3,084 kg | 6,096 lb · 2,765 kg | +12% 5425 (A) |
| Wheelbase declared | 85.7 in · 2,178 mm | 92.9 in · 2,360 mm | +8% 775-85 (DT) |
| Length declared | 151.5 in · 3,848 mm | 154.3 in · 3,920 mm | — |
| Width declared | 74.1 in · 1,882 mm | 77.2–96.9 in · 1,960–2,460 mm | differs |
| Ground clearance declared | 18.5 in · 470 mm | 19.7 in · 500 mm | +6% 775-85 (DT) |
| Turning radius, braked declared | 10.2 ft · 3.10 m | — | — |
| Fuel tank declared | 100.0 qt · 94.6 L | 64.5 qt · 61.0 L | +55% 5425 (A) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
John Deere 5425 (A) sources
- Source: Traktorenlexikon, “John Deere 5425”
Lamborghini 775-85 (DT) sources
- Source: Traktorenlexikon, “Lamborghini 774-85 N”