John Deere 5403 (A) vs VALMET 800
13 material differences
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (55%); they were not built in overlapping years (2007–2008; 1997–2002). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
13 material differences · 0 fields identical or within 5%, which is not counted as material
| Field | 5403 (A) | 800 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 73.1 hp | 79 hp | +8% 800 |
| Engine declared | John Deere 3.029 TPY | VALMET 420 DS or DSRE | differs |
| Displacement declared | 2.90 L | 4.40 L | +52% 800 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | — | Dry LuK double clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Hydraulic control declared | — | Constant flow | — |
| Pump flow declared | 10.8 gpm · 41.0 L/min | 14.7 gpm · 55.7 L/min | +36% 800 |
| Pressure declared | — | 2,901 psi · 200 bar | — |
| Three-point lift at ends declared | 3,913 lb · 1,775 kg | 7,419 lb · 3,365 kg | +90% 800 |
| Rear PTO speeds declared | 540 rpm | 540E/540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,725 lb · 2,143 kg | 7,341 lb · 3,330 kg | +55% 800 |
| Wheelbase declared | 80.3 in · 2,040 mm | 88.3 in · 2,244 mm | +10% 800 |
| Length declared | 138.4 in · 3,515 mm | 152.6 in · 3,877 mm | +10% 800 |
| Width declared | 73.4 in · 1,865 mm | 85.7 in · 2,177 mm | +17% 800 |
| Height declared | 96.1 in · 2,440 mm | 106.3 in · 2,700 mm | +11% 800 |
| Ground clearance declared | 15.0 in · 380 mm | 19.9 in · 505 mm | +33% 800 |
| Turning radius, braked declared | — | 15.7 ft · 4.80 m | — |
| Fuel tank declared | 76.0 qt · 71.9 L | 83.5 qt · 79.0 L | +10% 800 |
John Deere 5403 (A) sources
Source
- Source: Traktorenlexikon, “John Deere 5403”
VALMET 800 sources
Source
- Source: Traktorenlexikon, “Valmet 800”