John Deere 5400 (A) vs VALMET 505/505-4

12 material differences

Tractor one

1992–1997

No measured PTO figure

Tractor two

1983–1989

No measured PTO figure

Which should you choose?

Read our verdict on the 5400 (A) and the 505/505-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 2 fields identical or within 5%, which is not counted as material

John Deere 5400 (A) and VALMET 505/505-4, field by field
Field	5400 (A)	505/505-4	Gap
Engine
Engine power, claimed claimed	59.3 hp	64.1 hp	+8% 505/505-4
Engine declared	John Deere 3.029 Turbo	VALMET TD 33 DS 5	differs
Displacement declared	2.94 L	3.30 L	+12% 505/505-4
Maximum torque declared	115 lb·ft · 156 N·m	—	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Pedal-operated dry CARRARO single-disc clutch	Pedal-operated dry LuK single-plate clutch	differs
Hydraulics & hitch
Pump flow declared	11.8 gpm · 44.7 L/min	—	—
Pressure declared	3,408 psi · 235 bar	2,901 psi · 200 bar	+18% 5400 (A)
Three-point lift at ends declared	3,803 lb · 1,725 kg	8,699 lb · 3,946 kg	+129% 505/505-4
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	4,661 lb · 2,114 kg	7,760 lb · 3,520 kg	+67% 505/505-4
Wheelbase declared	80.7 in · 2,050 mm	93.2 in · 2,368 mm	+16% 505/505-4
Length declared	140.2 in · 3,561 mm	172.8 in · 4,390 mm	+23% 505/505-4
Width declared	72.7 in · 1,846 mm	77.2 in · 1,960 mm	+6% 505/505-4
Height declared	91.1 in · 2,314 mm	105.1 in · 2,670 mm	+15% 505/505-4
Ground clearance declared	18.1 in · 460 mm	18.3 in · 465 mm	—
Turning radius, braked declared	9.8 ft · 3.00 m	—	—
Fuel tank declared	72.0 qt · 68.1 L	190.2 qt · 180.0 L	+164% 505/505-4

Source

Source