7 material differences · fewer than 12
Tractor oneJohn Deere 4760 (A)1992–1994No measured PTO figureTractor twoMassey Ferguson MF 27751977–1983No measured PTO figure
Which should you choose?
We will not advise between these two machines, because the drive differs (Two-wheel or four-wheel drive; 2WD); they were not built in overlapping years (1992–1994; 1977–1983). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
7 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 4760 (A) | MF 2775 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 187.5 hp | 187.3 hp | — |
| Engine declared | John Deere 6.076 TRW-07 | Perkins AV 8.640 | differs |
| Displacement declared | 7.63 L | 10.50 L | +38% MF 2775 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 22.1 mph · 35.5 km/h | +18% MF 2775 |
| Clutch declared | Pedal-operated, hydraulic and oil-cooled multi-plate clutch | Dry single-plate clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Hydraulic control declared | — | Constant flow | — |
| Pump flow declared | — | 14.5 gpm · 55.0 L/min | — |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 16,030 lb · 7,271 kg | 13,312 lb · 6,038 kg | +20% 4760 (A) |
| Wheelbase declared | 118.5 in · 3,010 mm | 109.8 in · 2,790 mm | +8% 4760 (A) |
| Length declared | 213.4 in · 5,420 mm | 190.0 in · 4,826 mm | +12% 4760 (A) |
| Width declared | 118.0 in · 2,997 mm | — | — |
| Ground clearance declared | 17.9 in · 455 mm | — | — |
| Fuel tank declared | 407.9 qt · 386.0 L | — | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
John Deere 4760 (A) sources
- Source: Traktorenlexikon, “John Deere 4760”
- Source: Traktorenlexikon, “John Deere 4560”
Massey Ferguson MF 2775 sources
- Source: Traktorenlexikon, “Massey Ferguson MF 2775”