John Deere 4020 vs VALMET 1102 (-4)
8 material differences · fewer than 12
Which should you choose?
Read our verdict on the 4020 and the 1102 (-4) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 4020 | 1102 (-4) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 98.7 hp | 100.6 hp | — |
| Engine declared | — | VALMET 411 BS or 411 CS | — |
| Maximum torque declared | 260 lb·ft · 353 N·m | — | — |
| Transmission | |||
| Top speed declared | 12.4–18.6 mph · 20–30 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | Pedal operated dry single plate clutch | dry Fichtel & Sachs double clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Pump flow declared | 18.0 gpm · 68.0 L/min | 9.2 gpm · 35.0 L/min | +94% 4020 |
| Pressure declared | 2,248 psi · 155 bar | — | — |
| Three-point lift at ends declared | 5,952 lb · 2,700 kg | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 8,444 lb · 3,830 kg | 8,598 lb · 3,900 kg | — |
| Maximum permissible mass declared | 13,228 lb · 6,000 kg | — | — |
| Wheelbase declared | 89.0 in · 2,260 mm | 91.3 in · 2,320 mm | — |
| Length declared | 150.2 in · 3,815 mm | 154.7 in · 3,930 mm | — |
| Width declared | 89.6 in · 2,276 mm | 78.0 in · 1,980 mm | +15% 4020 |
| Height declared | 78.5 in · 1,994 mm | 106.7 in · 2,710 mm | +36% 1102 (-4) |
| Ground clearance declared | 23.2 in · 590 mm | 20.5 in · 520 mm | +13% 4020 |
| Turning radius, braked declared | 10.8 ft · 3.30 m | 12.1 ft · 3.70 m | +12% 1102 (-4) |
| Fuel tank declared | 135.3 qt · 128.0 L | 102.5 qt · 97.0 L | +32% 4020 |
John Deere 4020 sources
Source
- Source: Traktorenlexikon, “John Deere 4020”
VALMET 1102 (-4) sources
Source
- Source: Traktorenlexikon, “Valmet 1102”