John Deere 4020 vs SAME Tiger 100 (DT)

11 material differences · fewer than 12

Tractor one

1965–1972

No measured PTO figure

Tractor two

1977–1980

No measured PTO figure

Which should you choose?

Read our verdict on the 4020 and the Tiger 100 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

John Deere 4020 and SAME Tiger 100 (DT), field by field
Field	4020	Tiger 100 (DT)	Gap
Engine
Engine power, claimed claimed	98.7 hp	101 hp	—
Engine declared	—	SAME DA 1055 P	—
Displacement declared	—	5.19 L	—
Maximum torque declared	260 lb·ft · 353 N·m	269 lb·ft · 365 N·m	—
Transmission
Top speed declared	12.4–18.6 mph · 20–30 km/h	15.5 mph · 25 km/h	differs
Clutch declared	Pedal operated dry single plate clutch	pedal-operated dry Borg & Beck single-plate clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Pump flow declared	18.0 gpm · 68.0 L/min	9.2 gpm · 35.0 L/min	+94% 4020
Pressure declared	2,248 psi · 155 bar	2,698 psi · 186 bar	+20% Tiger 100 (DT)
Three-point lift at ends declared	5,952 lb · 2,700 kg	6,482 lb · 2,940 kg	+9% Tiger 100 (DT)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,444 lb · 3,830 kg	8,311 lb · 3,770 kg	—
Maximum permissible mass declared	13,228 lb · 6,000 kg	—	—
Wheelbase declared	89.0 in · 2,260 mm	98.8 in · 2,510 mm	+11% Tiger 100 (DT)
Length declared	150.2 in · 3,815 mm	160.6 in · 4,080 mm	+7% Tiger 100 (DT)
Width declared	89.6 in · 2,276 mm	83.5 in · 2,120 mm	+7% 4020
Height declared	78.5 in · 1,994 mm	105.5 in · 2,680 mm	+34% Tiger 100 (DT)
Ground clearance declared	23.2 in · 590 mm	17.7 in · 450 mm	+31% 4020
Turning radius, braked declared	10.8 ft · 3.30 m	12.5 ft · 3.80 m	+15% Tiger 100 (DT)
Fuel tank declared	135.3 qt · 128.0 L	137.4 qt · 130.0 L	—

Source

Source