John Deere 3055 vs Massey Ferguson MF 3095 (A)

7 material differences · fewer than 12

Tractor one

1992–1993

No measured PTO figure

Tractor two

1990–1995

No measured PTO figure

Which should you choose?

Read our verdict on the 3055 and the MF 3095 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 8 fields identical or within 5%, which is not counted as material

John Deere 3055 and Massey Ferguson MF 3095 (A), field by field
Field	3055	MF 3095 (A)	Gap
Engine
Engine power, claimed claimed	103.7 hp	105.5 hp	—
Engine declared	John Deere 6.359 DL-011	Perkins 1006-6 HR3	differs
Displacement declared	5.88 L	5.99 L	—
Maximum torque declared	285 lb·ft · 387 N·m	300 lb·ft · 407 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated, dry LuK single-disc clutch	Pedal-operated, dry and air-cooled VALEO single-plate clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	Open centre	differs
Pump flow declared	24.2 gpm · 91.5 L/min	—	—
Pressure declared	3,336 psi · 230 bar	—	—
Three-point lift at ends declared	—	9,215 lb · 4,180 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,524 lb · 4,320 kg	9,645 lb · 4,375 kg	—
Maximum permissible mass declared	—	15,432 lb · 7,000 kg	—
Wheelbase declared	100.4 in · 2,551 mm	106.1 in · 2,696 mm	+6% MF 3095 (A)
Length declared	166.9 in · 4,240 mm	170.2 in · 4,323 mm	—
Width declared	89.0 in · 2,260 mm	74.8 in · 1,899 mm	+19% 3055
Height declared	107.7 in · 2,735 mm	109.2 in · 2,774 mm	—
Ground clearance declared	17.3 in · 440 mm	18.0 in · 457 mm	—
Turning radius, braked declared	13.2 ft · 4.01 m	—	—
Fuel tank declared	127.9 qt · 121.0 L	182.8 qt · 173.0 L	+43% MF 3095 (A)

Source

Source