John Deere 3050 (A) vs SAME Silver 90 (DT)

15 material differences

Tractor one

1986–1993

No measured PTO figure

Tractor two

1995–2004

No measured PTO figure

Which should you choose?

Read our verdict on the 3050 (A) and the Silver 90 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

15 material differences · 2 fields identical or within 5%, which is not counted as material

John Deere 3050 (A) and SAME Silver 90 (DT), field by field
Field	3050 (A)	Silver 90 (DT)	Gap
Engine
Engine power, claimed claimed	90.8 hp	88.8 hp	—
Engine declared	John Deere 6.359 DL-008	SAME-DEUTZ-FAHR 1000.4 AT 2	differs
Displacement declared	5.88 L	4.00 L	+47% 3050 (A)
Maximum torque declared	251 lb·ft · 340 N·m	226 lb·ft · 307 N·m	+11% 3050 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9 mph · 40 km/h	differs
Clutch declared	—	Pedal operated dry single plate clutch	—
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Pump flow declared	13.8 gpm · 52.3 L/min	14.8 gpm · 56.1 L/min	+7% Silver 90 (DT)
Pressure declared	3,336 psi · 230 bar	3,118 psi · 215 bar	+7% 3050 (A)
Three-point lift at ends declared	9,978 lb · 4,526 kg	7,937 lb · 3,600 kg	+26% 3050 (A)
Rear PTO speeds declared	540/1000 rpm	540/540E/1000E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	8,642 lb · 3,920 kg	7,981 lb · 3,620 kg	+8% 3050 (A)
Maximum permissible mass declared	14,771 lb · 6,700 kg	13,228 lb · 6,000 kg	+12% 3050 (A)
Wheelbase declared	100.4 in · 2,551 mm	97.2 in · 2,470 mm	—
Length declared	188.5 in · 4,787 mm	161.6 in · 4,105 mm	+17% 3050 (A)
Width declared	83.8 in · 2,129 mm	72.4 in · 1,840 mm	+16% 3050 (A)
Height declared	116.7 in · 2,964 mm	105.3 in · 2,675 mm	+11% 3050 (A)
Ground clearance declared	25.6 in · 650 mm	20.3 in · 515 mm	+26% 3050 (A)
Turning radius, braked declared	—	11.8 ft · 3.60 m	—
Fuel tank declared	127.9–182.8 qt · 121.0–173.0 L	158.5 qt · 150.0 L	differs

Source

Source