John Deere 3050 (A) vs New Holland TS 100 (A)

12 material differences

Tractor one

1986–1993

No measured PTO figure

Tractor two

1997–2003

No measured PTO figure

Which should you choose?

Read our verdict on the 3050 (A) and the TS 100 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 5 fields identical or within 5%, which is not counted as material

John Deere 3050 (A) and New Holland TS 100 (A), field by field
Field	3050 (A)	TS 100 (A)	Gap
Engine
Engine power, claimed claimed	90.8 hp	88.8 hp	—
Engine declared	John Deere 6.359 DL-008	New Holland 450 T/PF	differs
Displacement declared	5.88 L	4.99 L	+18% 3050 (A)
Maximum torque declared	251 lb·ft · 340 N·m	277 lb·ft · 375 N·m	+10% TS 100 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Pump flow declared	13.8 gpm · 52.3 L/min	22.7 gpm · 86.0 L/min	+64% TS 100 (A)
Pressure declared	3,336 psi · 230 bar	2,857 psi · 197 bar	+17% 3050 (A)
Three-point lift at ends declared	9,978 lb · 4,526 kg	9,467 lb · 4,294 kg	+5% 3050 (A)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,642 lb · 3,920 kg	8,662 lb · 3,929 kg	—
Maximum permissible mass declared	14,771 lb · 6,700 kg	13,228 lb · 6,000 kg	+12% 3050 (A)
Wheelbase declared	100.4 in · 2,551 mm	91.7 in · 2,330 mm	+9% 3050 (A)
Length declared	188.5 in · 4,787 mm	150.0 in · 3,810 mm	+26% 3050 (A)
Width declared	83.8 in · 2,129 mm	85.8 in · 2,180 mm	—
Height declared	116.7 in · 2,964 mm	108.7 in · 2,762 mm	+7% 3050 (A)
Ground clearance declared	25.6 in · 650 mm	17.7 in · 450 mm	+44% 3050 (A)
Turning radius, braked declared	—	10.8 ft · 3.30 m	—
Fuel tank declared	127.9–182.8 qt · 121.0–173.0 L	169.1 qt · 160.0 L	differs

Source

Source