John Deere 3020 vs SAME Saturno 80 (DT)

11 material differences · fewer than 12

Tractor one

1964–1972

No measured PTO figure

Tractor two

1972–1980

No measured PTO figure

Which should you choose?

Read our verdict on the 3020 and the Saturno 80 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 3 fields identical or within 5%, which is not counted as material

John Deere 3020 and SAME Saturno 80 (DT), field by field
Field	3020	Saturno 80 (DT)	Gap
Engine
Engine power, claimed claimed	74.0 hp	75.9 hp	—
Engine declared	John Deere 13 E	SAME DA 039-1054 L or 1054 P	differs
Displacement declared	4.43 L	4.15 L	+7% 3020
Maximum torque declared	186 lb·ft · 252 N·m	—	—
Transmission
Top speed declared	12.4–18.6 mph · 20–30 km/h	15.5–18.6 mph · 25–30 km/h	differs
Clutch declared	Pedal-operated dry single-disc clutch	Pedal-operated dry two-stage SAME double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Pump flow declared	18.0 gpm · 68.0 L/min	—	—
Three-point lift at ends declared	3,968 lb · 1,800 kg	4,806 lb · 2,180 kg	+21% Saturno 80 (DT)
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	7,553 lb · 3,426 kg	6,085 lb · 2,760 kg	+24% 3020
Maximum permissible mass declared	11,067 lb · 5,020 kg	—	—
Wheelbase declared	90.0 in · 2,286 mm	92.5 in · 2,350 mm	—
Length declared	138.5 in · 3,518 mm	143.7 in · 3,650 mm	—
Width declared	89.6 in · 2,276 mm	76.0 in · 1,930 mm	+18% 3020
Height declared	77.5 in · 1,969 mm	96.9 in · 2,460 mm	+25% Saturno 80 (DT)
Ground clearance declared	15.6 in · 395 mm	19.7 in · 500 mm	+27% Saturno 80 (DT)
Turning radius, braked declared	—	11.5 ft · 3.50 m	—
Fuel tank declared	116.0 qt · 109.8 L	84.5 qt · 80.0 L	+37% 3020

Source

Source