12 material differences
Tractor oneJohn Deere 30101962–1964No measured PTO figureTractor twoSOMECA 670 (DT)1968–1971No measured PTO figure
Which should you choose?
Read our verdict on the 3010 and the 670 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 3010 | 670 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 64.1 hp | 64.1 hp | — |
| Engine declared | — | O.M.-FIAT CO 3/60 | — |
| Displacement declared | — | 4.56 L | — |
| Maximum torque declared | 171 lb·ft · 231 N·m | 207 lb·ft · 281 N·m | +22% 670 (DT) |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 14.9 mph · 24 km/h | +25% 3010 |
| Clutch declared | Dry double clutch | Pedal-operated two-stage dry FEREDO double clutch type 11/10" | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 18.0 gpm · 68.0 L/min | 6.1 gpm · 23.2 L/min | +193% 3010 |
| Pressure declared | 2,247 psi · 155 bar | 2,843 psi · 196 bar | +26% 670 (DT) |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 6,967 lb · 3,160 kg | 6,041 lb · 2,740 kg | +15% 3010 |
| Wheelbase declared | 81.5 in · 2,070 mm | 91.2 in · 2,316 mm | +12% 670 (DT) |
| Length declared | 147.6 in · 3,750 mm | 142.3 in · 3,615 mm | — |
| Width declared | 83.7 in · 2,125 mm | 77.6–96.1 in · 1,970–2,440 mm | differs |
| Height, over the steering wheel declared | 76.8 in · 1,950 mm | 69.9 in · 1,775 mm | +10% 3010 |
| Ground clearance declared | 19.3 in · 490 mm | 13.4 in · 340 mm | +44% 3010 |
| Turning radius, braked declared | 10.7 ft · 3.25 m | 12.9 ft · 3.93 m | +21% 670 (DT) |
| Fuel tank declared | 116.2 qt · 110.0 L | 84.5 qt · 80.0 L | +38% 3010 |
John Deere 3010 sources
Source
- Source: Traktorenlexikon, “John Deere 3010”
SOMECA 670 (DT) sources
Source
- Source: Traktorenlexikon, “Someca 670”