4 material differences · fewer than 12
Tractor oneJohn Deere 2950 (A)1983–1988No measured PTO figureTractor twoSteyr 988 (a)1977–1979No measured PTO figure
Which should you choose?
Read our verdict on the 2950 (A) and the 988 (a) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
4 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | 2950 (A) | 988 (a) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 83.9 hp | 83.9 hp | — |
| Engine declared | — | Steyr WD-412.41 | — |
| Displacement declared | — | 4.39 L | — |
| Maximum torque declared | — | 217 lb·ft · 294 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Pedal-operated, dry single-disc clutch as driving clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Pump flow declared | 23.0 gpm · 87.1 L/min | — | — |
| Rear PTO speeds declared | — | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 9,098 lb · 4,127 kg | 7,595 lb · 3,445 kg | +20% 2950 (A) |
| Maximum permissible mass declared | 13,184 lb · 5,980 kg | — | — |
| Wheelbase declared | 100.4 in · 2,550 mm | 89.8 in · 2,280 mm | +12% 2950 (A) |
| Length declared | 153.1 in · 3,890 mm | 153.1 in · 3,890 mm | — |
| Width declared | 79.9 in · 2,029 mm | 76.0 in · 1,930 mm | — |
| Height, over the cab declared | 108.3 in · 2,750 mm | 103.1 in · 2,620 mm | — |
| Ground clearance declared | 25.6 in · 650 mm | 19.3 in · 490 mm | +33% 2950 (A) |
| Turning radius, braked declared | 12.5 ft · 3.80 m | 12.1 ft · 3.70 m | — |
| Fuel tank declared | 129.2 qt · 122.3 L | 114.1 qt · 108.0 L | +13% 2950 (A) |
John Deere 2950 (A) sources
Source
- Source: Traktorenlexikon, “John Deere 2950”
Steyr 988 (a) sources
Source
- Source: Traktorenlexikon, “Steyr 988”