John Deere 2950 (A) vs Landini 10800 (DT)

7 material differences · fewer than 12

Tractor one

1983–1988

No measured PTO figure

Tractor two

1987–2000

No measured PTO figure

Which should you choose?

Read our verdict on the 2950 (A) and the 10800 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 4 fields identical or within 5%, which is not counted as material

John Deere 2950 (A) and Landini 10800 (DT), field by field
Field	2950 (A)	10800 (DT)	Gap
Engine
Engine power, claimed claimed	83.9 hp	95.7 hp	+14% 10800 (DT)
Engine declared	—	PERKINS TW 6.354-4	—
Displacement declared	—	5.80 L	—
Maximum torque declared	—	245 lb·ft · 332 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Pedal-operated, dry single-disc clutch as driving clutch	pedal-operated dry single-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Pump flow declared	23.0 gpm · 87.1 L/min	13.5 gpm · 51.2 L/min	+70% 2950 (A)
Pressure declared	—	2,901 psi · 200 bar	—
Three-point lift at ends declared	—	9,921 lb · 4,500 kg	—
Rear PTO speeds declared	—	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,098 lb · 4,127 kg	9,480 lb · 4,300 kg	—
Maximum permissible mass declared	13,184 lb · 5,980 kg	15,432 lb · 7,000 kg	+17% 10800 (DT)
Wheelbase declared	100.4 in · 2,550 mm	106.1 in · 2,696 mm	+6% 10800 (DT)
Length declared	153.1 in · 3,890 mm	175.2 in · 4,450 mm	+14% 10800 (DT)
Width declared	79.9 in · 2,029 mm	83.9 in · 2,130 mm	—
Height declared	108.3 in · 2,750 mm	108.7 in · 2,760 mm	—
Ground clearance declared	25.6 in · 650 mm	16.1 in · 410 mm	+59% 2950 (A)
Turning radius, braked declared	12.5 ft · 3.80 m	—	—
Fuel tank declared	129.2 qt · 122.3 L	200.8 qt · 190.0 L	+55% 10800 (DT)

Source

Source