John Deere 2700 (A) vs VALMET 6250 HiTech

13 material differences

Tractor one

1993–1996

No measured PTO figure

Tractor two

2000–2006

No measured PTO figure

Which should you choose?

Read our verdict on the 2700 (A) and the 6250 HiTech → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 3 fields identical or within 5%, which is not counted as material

John Deere 2700 (A) and VALMET 6250 HiTech, field by field
Field	2700 (A)	6250 HiTech	Gap
Engine
Engine power, claimed claimed	83.9 hp	—	—
Engine declared	ZETOR 1201	VALMET 420 DSRE or 44 DT	differs
Displacement declared	4.16 L	4.40 L	+6% 6250 HiTech
Maximum torque declared	219 lb·ft · 297 N·m	—	—
Transmission
Top speed declared	18.6–21.7 mph · 30–35 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry ZETOR single-disc clutch	Electrically operated dry Fichtel & Sachs single-plate clutch	differs
Hydraulics & hitch
Pump flow declared	12.3 gpm · 46.7 L/min	19.4 gpm · 73.5 L/min	+57% 6250 HiTech
Pressure declared	2,350 psi · 162 bar	2,901 psi · 200 bar	+23% 6250 HiTech
Three-point lift at ends declared	9,744 lb · 4,420 kg	12,588 lb · 5,710 kg	+29% 6250 HiTech
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,344 lb · 3,785 kg	9,698 lb · 4,399 kg	+16% 6250 HiTech
Maximum permissible mass declared	16,535 lb · 7,500 kg	19,842 lb · 9,000 kg	+20% 6250 HiTech
Wheelbase declared	93.5 in · 2,375 mm	91.6 in · 2,326 mm	—
Length declared	165.0 in · 4,190 mm	176.2 in · 4,475 mm	+7% 6250 HiTech
Width declared	76.8 in · 1,950 mm	85.8 in · 2,179 mm	+12% 6250 HiTech
Height declared	103.9 in · 2,640 mm	109.1 in · 2,771 mm	—
Ground clearance declared	12.8 in · 325 mm	17.1 in · 434 mm	+34% 6250 HiTech
Turning radius, braked declared	—	15.3 ft · 4.65 m	—
Fuel tank declared	111.0 qt · 105.0 L	174.4 qt · 165.0 L	+57% 6250 HiTech

Source

Source