John Deere 2400 (A) vs Massey Ferguson MF 194 (A)

8 material differences · fewer than 12

Tractor one

1993–1996

No measured PTO figure

Tractor two

1980–1983

No measured PTO figure

Which should you choose?

Read our verdict on the 2400 (A) and the MF 194 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 6 fields identical or within 5%, which is not counted as material

John Deere 2400 (A) and Massey Ferguson MF 194 (A), field by field
Field	2400 (A)	MF 194 (A)	Gap
Engine
Engine power, claimed claimed	73.1 hp	74.0 hp	—
Engine declared	ZETOR 7301	Perkins A 4.248	differs
Displacement declared	3.92 L	4.07 L	—
Maximum torque declared	207 lb·ft · 281 N·m	212 lb·ft · 287 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	15.5 mph · 25 km/h	+20% 2400 (A)
Clutch declared	Dry Zetor double clutch	—	—
Hydraulics & hitch
Pump flow declared	10.6 gpm · 40.0 L/min	7.1 gpm · 26.7 L/min	+50% 2400 (A)
Pressure declared	1,160 psi · 80 bar	2,489 psi · 172 bar	+115% MF 194 (A)
Three-point lift at ends declared	8,863 lb · 4,020 kg	4,134 lb · 1,875 kg	+114% 2400 (A)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	7,055 lb · 3,200 kg	5,952 lb · 2,700 kg	+19% 2400 (A)
Maximum permissible mass declared	12,346 lb · 5,600 kg	—	—
Wheelbase declared	88.8 in · 2,256 mm	90.2 in · 2,290 mm	—
Length declared	147.8 in · 3,755 mm	148.8 in · 3,780 mm	—
Width declared	73.8 in · 1,875 mm	—	—
Height declared	104.9 in · 2,665 mm	91.3 in · 2,320 mm	+15% 2400 (A)
Ground clearance declared	15.1 in · 383 mm	—	—
Turning radius, braked declared	—	12.0 ft · 3.65 m	—
Fuel tank declared	100.4 qt · 95.0 L	64.5 qt · 61.0 L	+56% 2400 (A)

Source

Source