John Deere 2130 vs SAME Explorer 75 (DT)

14 material differences

Tractor one

1972–1979

No measured PTO figure

Tractor two

1985–1987

No measured PTO figure

Which should you choose?

Read our verdict on the 2130 and the Explorer 75 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

14 material differences · 3 fields identical or within 5%, which is not counted as material

John Deere 2130 and SAME Explorer 75 (DT), field by field
Field	2130	Explorer 75 (DT)	Gap
Engine
Engine power, claimed claimed	74.0 hp	74.0 hp	—
Engine declared	John Deere 4.329 DL-01	SAME 916.4 A	differs
Displacement declared	3.92 L	3.67 L	+7% 2130
Maximum torque declared	188 lb·ft · 255 N·m	207 lb·ft · 280 N·m	+10% Explorer 75 (DT)
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	18.6 mph · 30 km/h	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Hydraulic control declared	—	Load sensing	—
Pump flow declared	12.6 gpm · 47.6 L/min	9.5 gpm · 36.0 L/min	+32% 2130
Pressure declared	3,989 psi · 275 bar	1,740 psi · 120 bar	+129% 2130
Three-point lift at ends declared	4,553 lb · 2,065 kg	7,606 lb · 3,450 kg	+67% Explorer 75 (DT)
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	6,636 lb · 3,010 kg	6,614 lb · 3,000 kg	—
Maximum permissible mass declared	9,921 lb · 4,500 kg	—	—
Wheelbase declared	85.7 in · 2,178 mm	95.1 in · 2,415 mm	+11% Explorer 75 (DT)
Length declared	141.7 in · 3,598 mm	145.2 in · 3,687 mm	—
Width declared	80.3 in · 2,040 mm	73.6 in · 1,870 mm	+9% 2130
Height declared	95.6 in · 2,428 mm	102.1 in · 2,593 mm	+7% Explorer 75 (DT)
Ground clearance declared	25.8 in · 655 mm	20.5 in · 520 mm	+26% 2130
Turning radius, braked declared	10.3 ft · 3.15 m	9.6 ft · 2.94 m	+7% 2130
Fuel tank declared	95.1 qt · 90.0 L	116.2 qt · 110.0 L	+22% Explorer 75 (DT)

Source

Source