John Deere 2130 vs Renault 75-12 RS

11 material differences · fewer than 12

Tractor one

1972–1979

No measured PTO figure

Tractor two

1984–1987

No measured PTO figure

Which should you choose?

Read our verdict on the 2130 and the 75-12 RS → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

John Deere 2130 and Renault 75-12 RS, field by field
Field	2130	75-12 RS	Gap
Engine
Engine power, claimed claimed	74.0 hp	74.0 hp	—
Engine declared	John Deere 4.329 DL-01	MWM D 226-4	differs
Displacement declared	3.92 L	4.15 L	+6% 75-12 RS
Maximum torque declared	188 lb·ft · 255 N·m	192 lb·ft · 260 N·m	—
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	18.6 mph · 30 km/h	differs
Clutch declared	—	Dry LuK double clutch	—
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Pump flow declared	12.6 gpm · 47.6 L/min	10.5 gpm · 39.9 L/min	+19% 2130
Pressure declared	3,989 psi · 275 bar	—	—
Three-point lift at ends declared	4,553 lb · 2,065 kg	3,704 lb · 1,680 kg	+23% 2130
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,636 lb · 3,010 kg	6,878 lb · 3,120 kg	—
Maximum permissible mass declared	9,921 lb · 4,500 kg	—	—
Wheelbase declared	85.7 in · 2,178 mm	95.6 in · 2,428 mm	+11% 75-12 RS
Length declared	141.7 in · 3,598 mm	154.7 in · 3,930 mm	+9% 75-12 RS
Width declared	80.3 in · 2,040 mm	78.0 in · 1,980 mm	—
Height declared	95.6 in · 2,428 mm	102.6 in · 2,607 mm	+7% 75-12 RS
Ground clearance declared	25.8 in · 655 mm	14.8 in · 377 mm	+74% 2130
Turning radius, braked declared	10.3 ft · 3.15 m	12.8 ft · 3.90 m	+24% 75-12 RS
Fuel tank declared	95.1 qt · 90.0 L	77.1 qt · 73.0 L	+23% 2130

Source

Source