11 material differences · fewer than 12
Tractor oneJohn Deere 2020 OU1967–1972No measured PTO figureTractor twoZETOR 5511/55451966–1972No measured PTO figure
Which should you choose?
Read our verdict on the 2020 OU and the 5511/5545 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 2020 OU | 5511/5545 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 59.3 hp | 51.2 hp | +16% 2020 OU |
| Engine declared | John Deere M 5 BL 4 or 4202 DL-01 | ZETOR Z-5501 | differs |
| Displacement declared | 3.32 L | 3.12 L | +6% 2020 OU |
| Maximum torque declared | 141 lb·ft · 191 N·m | 133 lb·ft · 180 N·m | +6% 2020 OU |
| Transmission | |||
| Top speed declared | 12.4–15.5 mph · 20–25 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | Pedal operated two stage and dry Fichtel & Sachs double clutch | Pedal operated dry two-stage double clutch with mechanical booster | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Pump flow declared | 6.6 gpm · 24.8 L/min | 5.3 gpm · 20.0 L/min | +24% 2020 OU |
| Pressure declared | — | 2,134 psi · 147 bar | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,159 lb · 2,340 kg | 5,388 lb · 2,444 kg | — |
| Maximum permissible mass declared | 8,818 lb · 4,000 kg | — | — |
| Wheelbase declared | 80.1 in · 2,035 mm | 88.9 in · 2,257 mm | +11% 5511/5545 |
| Length declared | 140.6 in · 3,570 mm | 146.1 in · 3,710 mm | — |
| Width declared | 61.4–70.9 in · 1,560–1,800 mm | 72.2 in · 1,833 mm | differs |
| Ground clearance declared | 13.2 in · 336 mm | 16.5 in · 420 mm | +25% 5511/5545 |
| Turning radius, braked declared | 10.1 ft · 3.08 m | 11.0 ft · 3.34 m | +8% 5511/5545 |
| Fuel tank declared | 78.0 qt · 73.8 L | 74.0 qt · 70.0 L | +5% 2020 OU |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
John Deere 2020 OU sources
- Source: Traktorenlexikon, “John Deere 2020 OU”
ZETOR 5511/5545 sources
- Source: Traktorenlexikon, “Zetor 5511”