John Deere 1140 (A) vs VALMET 365 (365-4)

13 material differences

Tractor one

1979–1986

No measured PTO figure

Tractor two

1994–1997

No measured PTO figure

Which should you choose?

Read our verdict on the 1140 (A) and the 365 (365-4) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 2 fields identical or within 5%, which is not counted as material

John Deere 1140 (A) and VALMET 365 (365-4), field by field
Field	1140 (A)	365 (365-4)	Gap
Engine
Engine power, claimed claimed	55.3 hp	60.2 hp	+9% 365 (365-4)
Engine declared	—	VALMET 320 D	—
Displacement declared	—	3.30 L	—
Maximum torque declared	136 lb·ft · 185 N·m	162 lb·ft · 220 N·m	+19% 365 (365-4)
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	pedal-operated driving clutch	Dry FICHTEL & SACHS double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	Open centre	differs
Pump flow declared	12.4 gpm · 47.0 L/min	14.5 gpm · 55.0 L/min	+17% 365 (365-4)
Pressure declared	2,466 psi · 170 bar	2,901 psi · 200 bar	+18% 365 (365-4)
Three-point lift at ends declared	5,291 lb · 2,400 kg	5,688 lb · 2,580 kg	+8% 365 (365-4)
Rear PTO speeds declared	540 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	5,589 lb · 2,535 kg	6,217 lb · 2,820 kg	+11% 365 (365-4)
Maximum permissible mass declared	8,818 lb · 4,000 kg	—	—
Wheelbase declared	80.7 in · 2,050 mm	83.1 in · 2,112 mm	—
Length declared	138.0 in · 3,505 mm	146.1 in · 3,710 mm	+6% 365 (365-4)
Width declared	81.1 in · 2,060 mm	79.9 in · 2,030 mm	—
Height declared	95.3 in · 2,420 mm	103.5 in · 2,630 mm	+9% 365 (365-4)
Ground clearance declared	24.4 in · 621 mm	15.9 in · 405 mm	+53% 1140 (A)
Turning radius, braked declared	—	11.5 ft · 3.50 m	—
Fuel tank declared	82.4 qt · 78.0 L	77.1 qt · 73.0 L	+7% 1140 (A)

Source

Source