10 material differences · fewer than 12
Tractor oneJohn Deere 1140 (A)1979–1986No measured PTO figureTractor twoOLIVER 1365 (4 WD)1971–1975No measured PTO figure
Which should you choose?
Read our verdict on the 1140 (A) and the 1365 (4 WD) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 1140 (A) | 1365 (4 WD) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 55.3 hp | 60.2 hp | +9% 1365 (4 WD) |
| Engine declared | — | FIAT 8045 | — |
| Displacement declared | — | 3.46 L | — |
| Maximum torque declared | 136 lb·ft · 185 N·m | 147 lb·ft · 199 N·m | +8% 1365 (4 WD) |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 15.5 mph · 25 km/h | differs |
| Clutch declared | pedal-operated driving clutch | dry FERODO double clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Pump flow declared | 12.4 gpm · 47.0 L/min | 5.8 gpm · 21.8 L/min | +116% 1140 (A) |
| Pressure declared | 2,466 psi · 170 bar | 2,901 psi · 200 bar | +18% 1365 (4 WD) |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,589 lb · 2,535 kg | 4,960 lb · 2,250 kg | +13% 1140 (A) |
| Maximum permissible mass declared | 8,818 lb · 4,000 kg | — | — |
| Wheelbase declared | 80.7 in · 2,050 mm | 81.5 in · 2,070 mm | — |
| Length declared | 138.0 in · 3,505 mm | 122.0 in · 3,099 mm | +13% 1140 (A) |
| Width declared | 81.1 in · 2,060 mm | 70.0 in · 1,778 mm | +16% 1140 (A) |
| Ground clearance declared | 24.4 in · 621 mm | 18.8 in · 478 mm | +30% 1140 (A) |
| Turning radius, braked declared | — | 10.3 ft · 3.13 m | — |
| Fuel tank declared | 82.4 qt · 78.0 L | 57.1 qt · 54.0 L | +44% 1140 (A) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
John Deere 1140 (A) sources
- Source: Traktorenlexikon, “John Deere 1140”
OLIVER 1365 (4 WD) sources
- Source: Traktorenlexikon, “Oliver 1365”