John Deere 1120 vs Landini R-5000 Special (TL 14 N/A)

13 material differences

Tractor one

1967–1975

No measured PTO figure

Tractor two

1968–1974

No measured PTO figure

Which should you choose?

Read our verdict on the 1120 and the R-5000 Special (TL 14 N/A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 2 fields identical or within 5%, which is not counted as material

John Deere 1120 and Landini R-5000 Special (TL 14 N/A), field by field
Field	1120	R-5000 Special (TL 14 N/A)	Gap
Engine
Engine power, claimed claimed	48.4 hp	51.2 hp	+6% R-5000 Special (TL 14 N/A)
Engine declared	John Deere M 4 BL 4 or 3.164 DL-04	Perkins AD 3.152 S	differs
Displacement declared	2.70 L	2.50 L	+8% 1120
Maximum torque declared	119 lb·ft · 162 N·m	122 lb·ft · 166 N·m	—
Transmission
Top speed declared	12.4–15.5 mph · 20–25 km/h	18.6 mph · 30 km/h	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Pump flow declared	6.0 gpm · 22.6 L/min	6.9 gpm · 26.2 L/min	+16% R-5000 Special (TL 14 N/A)
Three-point lift at ends declared	3,571 lb · 1,620 kg	2,425 lb · 1,100 kg	+47% 1120
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	5,004 lb · 2,270 kg	4,167 lb · 1,890 kg	+20% 1120
Maximum permissible mass declared	7,716 lb · 3,500 kg	—	—
Wheelbase declared	80.7 in · 2,050 mm	76.0 in · 1,930 mm	+6% 1120
Length declared	135.0 in · 3,430 mm	126.8 in · 3,220 mm	+7% 1120
Width declared	66.1 in · 1,680 mm	70.9 in · 1,800 mm	+7% R-5000 Special (TL 14 N/A)
Height declared	60.6 in · 1,540 mm	61.4 in · 1,560 mm	—
Ground clearance declared	20.5 in · 521 mm	17.3 in · 440 mm	+18% 1120
Turning radius, braked declared	10.2 ft · 3.10 m	11.3 ft · 3.43 m	+11% R-5000 Special (TL 14 N/A)
Fuel tank declared	66.0 qt · 62.5 L	40.2 qt · 38.0 L	+64% 1120

Source

Source