J.I. Case 4690 vs New Holland-Fiat G 240
10 material differences · fewer than 12
Which should you choose?
Read our verdict on the 4690 and the G 240 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | 4690 | G 240 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 257 hp | 236.8 hp | +9% 4690 |
| Engine declared | CASE A-504 BDTL | New Holland VB 456 TC/AC | differs |
| Displacement declared | 8.26 L | 7.49 L | +10% 4690 |
| Maximum torque declared | — | 783 lb·ft · 1,062 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Hydraulically operated wet disc clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 15.5 gpm · 58.7 L/min | 33.5 gpm · 126.8 L/min | +116% G 240 |
| Pressure declared | — | 2,495 psi · 172 bar | — |
| Three-point lift at ends declared | — | 20,086 lb · 9,111 kg | — |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 22,311 lb · 10,120 kg | 19,460 lb · 8,827 kg | +15% 4690 |
| Maximum permissible mass declared | — | 30,093 lb · 13,650 kg | — |
| Wheelbase declared | 102.0 in · 2,591 mm | 122.6 in · 3,115 mm | +20% G 240 |
| Length declared | 232.0 in · 5,893 mm | 197.9 in · 5,027 mm | +17% 4690 |
| Width declared | 96.0 in · 2,438 mm | 86.1 in · 2,186 mm | +12% 4690 |
| Height declared | — | 122.8 in · 3,118 mm | — |
| Ground clearance declared | 18.5 in · 470 mm | 20.0 in · 509 mm | +8% G 240 |
| Turning radius, braked declared | — | 14.4 ft · 4.40 m | — |
| Fuel tank declared | 512.5 qt · 485.0 L | 439.6 qt · 416.0 L | +17% 4690 |
J.I. Case 4690 sources
Source
- Source: Traktorenlexikon, “Case 4690”
New Holland-Fiat G 240 sources
Source
- Source: Traktorenlexikon, “Fiatagri G240”