J.I. Case 4690 vs Massey Ferguson MF 9240
8 material differences · fewer than 12
Which should you choose?
Read our verdict on the 4690 and the MF 9240 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 4690 | MF 9240 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 257 hp | 236.8 hp | +9% 4690 |
| Engine declared | CASE A-504 BDTL | Cummins 6 CTA 8.3 A | differs |
| Displacement declared | 8.26 L | 8.27 L | — |
| Maximum torque declared | — | 660 lb·ft · 895 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Hydraulically operated wet disc clutch | oil cooled FUNK multi disc clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 15.5 gpm · 58.7 L/min | — | — |
| Pressure declared | — | 2,756 psi · 190 bar | — |
| Three-point lift at ends declared | — | 15,144 lb · 6,869 kg | — |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 22,311 lb · 10,120 kg | 19,872 lb · 9,014 kg | +12% 4690 |
| Maximum permissible mass declared | — | 26,455 lb · 12,000 kg | — |
| Wheelbase declared | 102.0 in · 2,591 mm | 115.0 in · 2,921 mm | +13% MF 9240 |
| Length declared | 232.0 in · 5,893 mm | 194.0 in · 4,928 mm | +20% 4690 |
| Width declared | 96.0 in · 2,438 mm | 96.1 in · 2,440 mm | — |
| Height declared | — | 123.8 in · 3,145 mm | — |
| Ground clearance declared | 18.5 in · 470 mm | 14.8 in · 376 mm | +25% 4690 |
| Fuel tank declared | 512.5 qt · 485.0 L | 360.3 qt · 341 L | +42% 4690 |
J.I. Case 4690 sources
Source
- Source: Traktorenlexikon, “Case 4690”
Massey Ferguson MF 9240 sources
Source
- Source: Traktorenlexikon, “Massey Ferguson MF 9240”