9 material differences · fewer than 12

Tractor oneJ.I. Case 4311960–1969No measured PTO figureTractor twoRenault Super 5-D (A)1965–1967No measured PTO figure

Which should you choose?

Read our verdict on the 431 and the Super 5-D (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

9 material differences · 4 fields identical or within 5%, which is not counted as material

J.I. Case 431 and Renault Super 5-D (A), field by field
Field431Super 5-D (A)Gap
Engine
Engine power, claimed claimed35.0 hp34.5 hp—
Engine declaredCASE G-188 DRENAULT 709/30-31differs
Displacement declared3.09 L2.26 L+36% 431
Transmission
Top speed declared12.4–21.7 mph · 20–35 km/h15.5 mph · 25 km/hdiffers
Hydraulics & hitch
Pump flow declared8.5 gpm · 32.2 L/min4.8 gpm · 18.0 L/min+79% 431
Rear PTO speeds declared540 rpm540 rpm—
Weight & dimensions
Unladen weight declared3,838 lb · 1,741 kg3,494 lb · 1,585 kg+10% 431
Wheelbase declared85.0 in · 2,159 mm73.2 in · 1,860 mm+16% 431
Length declared130.1 in · 3,305 mm129.1 in · 3,280 mm—
Width declared79.6 in · 2,022 mm61.8–83.1 in · 1,570–2,110 mmdiffers
Ground clearance declared20.1 in · 510 mm12.6 in · 320 mm+59% 431
Turning radius, braked declared7.9 ft · 2.41 m9.5 ft · 2.90 m+20% Super 5-D (A)
Fuel tank declared40.8 qt · 38.6 L42.3 qt · 40.0 L—

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

J.I. Case 431 sources

Source
  • Source: Traktorenlexikon, “Case 431”

Renault Super 5-D (A) sources

Source
  • Source: Traktorenlexikon, “Renault Super 5D R7054”