J.I. Case 3294 vs John Deere 7810
9 material differences · fewer than 12
Which should you choose?
We will not advise between these two machines, because their power is not stated as the same quantity on both; they were not built in overlapping years (1984–1985; 1997–2003). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
9 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 3294 | 7810 | Gap |
|---|---|---|---|
| Measured performance | |||
| PTO power, measured measured | — | 166.2 hp | — |
| Drawbar power, measured measured | — | 148.6 hp | — |
| Engine | |||
| Engine power, claimed claimed | 194.3 hp | — | — |
| Engine declared | CASE 504 BDT | John Deere 6.081 TRW-02 | differs |
| Displacement declared | 8.26 L | 8.13 L | — |
| Maximum torque declared | — | 496 lb·ft · 673.0 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6–31.1 mph · 30–50 km/h | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Closed centre | — |
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | 23.0 gpm · 87.1 L/min | 26.9 gpm · 101.8 L/min | +17% 7810 |
| Pressure declared | — | 2,944–3,031 psi · 203–209 bar | — |
| Rear PTO speeds declared | 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 17,915 lb · 8,126 kg | 14,575–15,565 lb · 6,611–7,060 kg | differs |
| Maximum permissible mass declared | — | 25,353 lb · 11,500 kg | — |
| Wheelbase declared | 104.0 in · 2,642 mm | 110.2–114.2 in · 2,800–2,900 mm | differs |
| Length declared | 182.0 in · 4,623 mm | 187.2 in · 4,755 mm | — |
| Width declared | 96.0 in · 2,438 mm | 118.6 in · 3,012 mm | +24% 7810 |
| Height declared | 116.9 in · 2,970 mm | 119.0 in · 3,023 mm | — |
| Ground clearance declared | 22.5 in · 572 mm | 20.3 in · 515 mm | +11% 3294 |
| Turning radius, braked declared | 14.8 ft · 4.52 m | — | — |
| Fuel tank declared | 259.9 qt · 246.0 L | 285.9 qt · 270.6 L | +10% 7810 |
J.I. Case 3294 sources
Source
- Source: Traktorenlexikon, “Case 3294”
- Source: Traktorenlexikon, “Case 2290”
John Deere 7810 sources
Source
- Source: OECD test report 1713, 1997
- Source: Traktorenlexikon, “John Deere 7810”
- Source: OECD test report 1714, 1997