9 material differences · fewer than 12
Tractor oneJ.I. Case 10701969–1978No measured PTO figureTractor twoVALMET 1102 (-4)1973–1980No measured PTO figure
Which should you choose?
Read our verdict on the 1070 and the 1102 (-4) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 1070 | 1102 (-4) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 100.7 hp | 100.6 hp | — |
| Engine declared | CASE A-451 | VALMET 411 BS or 411 CS | differs |
| Displacement declared | 7.39 L | — | — |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | — | dry Fichtel & Sachs double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 16.0 gpm · 60.6 L/min | 9.2 gpm · 35.0 L/min | +73% 1070 |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 10,311 lb · 4,677 kg | 8,598 lb · 3,900 kg | +20% 1070 |
| Wheelbase declared | 108.0 in · 2,743 mm | 91.3 in · 2,320 mm | +18% 1070 |
| Length declared | 162.0 in · 4,115 mm | 154.7 in · 3,930 mm | — |
| Width declared | 88.0 in · 2,235 mm | 78.0 in · 1,980 mm | +13% 1070 |
| Ground clearance declared | 15.0 in · 381 mm | 20.5 in · 520 mm | +36% 1102 (-4) |
| Turning radius, braked declared | 13.1 ft · 3.99 m | 12.1 ft · 3.70 m | +8% 1070 |
| Fuel tank declared | 200.0 qt · 189.3 L | 102.5 qt · 97.0 L | +95% 1070 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
J.I. Case 1070 sources
- Source: Traktorenlexikon, “Case 1070”
VALMET 1102 (-4) sources
- Source: Traktorenlexikon, “Valmet 1102”