6 material differences · fewer than 12
Tractor oneInternational Harvester Super FC-C1952–1957No measured PTO figureTractor twoLanz D 70061943–1945No measured PTO figure
Which should you choose?
Read our verdict on the Super FC-C and the D 7006 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | Super FC-C | D 7006 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 24 hp | 24.5 hp | — |
| Engine declared | INTERNATIONAL HARVESTER C-123 | — | — |
| Displacement declared | 2.01 L | — | — |
| Maximum torque declared | 116 lb·ft · 157 N·m | — | — |
| Transmission | |||
| Top speed declared | 10.6 mph · 17 km/h | 9.4 mph · 15.1 km/h | +13% Super FC-C |
| Clutch declared | — | Pedal operated three-shoe clutch with clutch brake | — |
| Hydraulics & hitch | |||
| Pump flow declared | 4.6 gpm · 17.3 L/min | — | — |
| Rear PTO speeds declared | 539 rpm | 850 | differs |
| Weight & dimensions | |||
| Unladen weight declared | 3,175 lb · 1,440 kg | 5,203 lb · 2,360 kg | +64% D 7006 |
| Wheelbase declared | 91.5 in · 2,324 mm | 66.5 in · 1,690 mm | +38% Super FC-C |
| Length declared | 129.5 in · 3,290 mm | 130.7 in · 3,320 mm | — |
| Width declared | 78.0–87.8 in · 1,980–2,230 mm | 63.0 in · 1,600 mm | differs |
| Ground clearance declared | 22.4 in · 570 mm | 13.0 in · 330 mm | +73% Super FC-C |
| Turning radius, braked declared | 12.0 ft · 3.65 m | — | — |
| Fuel tank declared | 44.1 qt · 41.75 L | — | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
International Harvester Super FC-C sources
- Source: Traktorenlexikon, “McCormick Super FC-C”
- Source: Traktorenlexikon, “McCormick Farmall Super-A 1”
Lanz D 7006 sources
- Source: Traktorenlexikon, “Lanz D 7006 Reingas”