International Harvester International 424 vs John Deere 930

11 material differences · fewer than 12

Tractor one

1964–1967

No measured PTO figure

Tractor two

1974–1977

No measured PTO figure

Which should you choose?

Read our verdict on the International 424 and the 930 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 1 fields identical or within 5%, which is not counted as material

International Harvester International 424 and John Deere 930, field by field
Field	International 424	930	Gap
Engine
Engine power, claimed claimed	36.5 hp	40.5 hp	+11% 930
Engine declared	INTERNATIONAL HARVESTER C-146	John Deere 3.164 DL 15	differs
Displacement declared	—	2.70 L	—
Maximum torque declared	113 lb·ft · 153 N·m	107 lb·ft · 145 N·m	+6% International 424
Transmission
Top speed declared	15.5 mph · 25 km/h	16.8–18.6 mph · 27–30 km/h	differs
Clutch declared	—	Pedal operated, two-stage dry Fichtel & Sachs double clutch	—
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	6.0 gpm · 22.7 L/min	6.7 gpm · 25.4 L/min	+12% 930
Pressure declared	—	3,481–4,496 psi · 240–310 bar	—
Three-point lift at ends declared	—	3,490 lb · 1,583 kg	—
Rear PTO speeds declared	540 rpm	—	—
Weight & dimensions
Unladen weight declared	4,054 lb · 1,839 kg	4,817 lb · 2,185 kg	+19% 930
Maximum permissible mass declared	—	7,055 lb · 3,200 kg	—
Wheelbase declared	70.0 in · 1,778 mm	74.4 in · 1,890 mm	+6% 930
Length declared	121.0 in · 3,073 mm	136.2 in · 3,460 mm	+13% 930
Width declared	67.2 in · 1,708 mm	66.5 in · 1,690 mm	—
Height declared	57.0 in · 1,448 mm	89.8 in · 2,280 mm	+57% 930
Ground clearance declared	18.0 in · 457 mm	12.8 in · 325 mm	+41% International 424
Turning radius, braked declared	8.2 ft · 2.49 m	9.6 ft · 2.92 m	+17% 930
Fuel tank declared	56.0 qt · 53.0 L	66.0 qt · 62.5 L	+18% 930

Source

Source