13 material differences

Tractor oneInternational Harvester International 3401958–1963No measured PTO figureTractor twoKramer KL 4001960–1967No measured PTO figure

Which should you choose?

Read our verdict on the International 340 and the KL 400 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 2 fields identical or within 5%, which is not counted as material

International Harvester International 340 and Kramer KL 400, field by field
Field	International 340	KL 400	Gap
Engine
Engine power, claimed claimed	37.4 hp	37.3 hp	—
Engine declared	INTERNATIONAL HARVESTER C-135	12/1960 bis 2/1964 = KHD F3L 712	differs
Displacement declared	2.21 L	2.55 L	+16% KL 400
Maximum torque declared	128 lb·ft · 174 N·m	92 lb·ft · 125 N·m	+39% International 340
Transmission
Top speed declared	15.5 mph · 25 km/h	12.4–17.0 mph · 20.0–27.4 km/h	differs
Clutch declared	Pedal operated dry Rockford single plate clutch	Double clutch by Fichtel & Sachs	differs
Hydraulics & hitch
Pump flow declared	9.5 gpm · 36.1 L/min	5.3 gpm · 20.0 L/min	+81% International 340
Pressure declared	—	1,707 psi · 118 bar	—
Rear PTO speeds declared	540 rpm	585 rpm	differs
Weight & dimensions
Unladen weight declared	5,194 lb · 2,356 kg	3,946–4,299 lb · 1,790–1,950 kg	differs
Maximum permissible mass declared	—	5,512 lb · 2,500 kg	—
Wheelbase declared	73.5 in · 1,867 mm	77.2–80.7 in · 1,960–2,050 mm	differs
Length declared	117.0 in · 2,972 mm	124.0–130.9 in · 3,150–3,325 mm	differs
Width declared	64.0 in · 1,626 mm	62.6 in · 1,590 mm	—
Height, over the steering wheel declared	59.0 in · 1,499 mm	63.0 in · 1,600 mm	+7% KL 400
Ground clearance declared	13.0 in · 330 mm	15.7 in · 400 mm	+21% KL 400
Turning radius, braked declared	12.0 ft · 3.66 m	—	—
Fuel tank declared	61.3 qt · 58.0 L	44.4 qt · 42 L	+38% International 340

Source

Source