9 material differences · fewer than 12
Tractor oneInternational Harvester B-4141961–1966No measured PTO figureTractor twoWarchalowski WT-401958–1961No measured PTO figure
Which should you choose?
Read our verdict on the B-414 and the WT-40 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | B-414 | WT-40 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 35.5 hp | 35.5 hp | — |
| Engine declared | INTERNATIONAL HARVESTER BD-154 | WARCHALOWSKI D-41 | differs |
| Displacement declared | 2.52 L | 2.04 L | +23% B-414 |
| Maximum torque declared | 114 lb·ft · 155 N·m | — | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.0 mph · 29 km/h | +16% WT-40 |
| Clutch declared | Pedal operated, two-stage and dry BORG & BECK double clutch | Pedal operated two stage dry Fichtel and Sachs double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 7.5 gpm · 28.5 L/min | — | — |
| Rear PTO speeds declared | — | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 3,693 lb · 1,675 kg | 3,042 lb · 1,380 kg | +21% B-414 |
| Wheelbase declared | 76.5 in · 1,943 mm | 79.0 in · 2,007 mm | — |
| Length declared | 125.2 in · 3,180 mm | 118.1 in · 3,000 mm | +6% B-414 |
| Width declared | 66.1 in · 1,680 mm | 63.0 in · 1,600 mm | — |
| Ground clearance declared | 18.5 in · 470 mm | 16.3 in · 415 mm | +13% B-414 |
| Turning radius, braked declared | 10.2 ft · 3.10 m | 13.1 ft · 4.00 m | +29% WT-40 |
| Fuel tank declared | 50.9 qt · 48.2 L | 37.0 qt · 35.0 L | +38% B-414 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
International Harvester B-414 sources
Source
- Source: Traktorenlexikon, “McCormick B-414”
- Source: Traktorenlexikon, “IHC B-414”
Warchalowski WT-40 sources
Source
- Source: Traktorenlexikon, “Warchalowski WT 40”