International Harvester B-414 vs RÖHR R 35
9 material differences · fewer than 12
Which should you choose?
We will not advise between these two machines, because they were not built in overlapping years (1961–1966; 1949–1949). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
9 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | B-414 | R 35 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 35.5 hp | 35.5 hp | — |
| Engine declared | INTERNATIONAL HARVESTER BD-154 | MWM KD 215 D | differs |
| Displacement declared | 2.52 L | 3.53 L | +40% R 35 |
| Maximum torque declared | 114 lb·ft · 155 N·m | — | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 12.4 mph · 20 km/h | +25% B-414 |
| Clutch declared | Pedal operated, two-stage and dry BORG & BECK double clutch | Pedal operated dry single plate clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 7.5 gpm · 28.5 L/min | — | — |
| Rear PTO speeds declared | — | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 3,693 lb · 1,675 kg | 4,167 lb · 1,890 kg | +13% R 35 |
| Wheelbase declared | 76.5 in · 1,943 mm | 76.4 in · 1,940 mm | — |
| Length declared | 125.2 in · 3,180 mm | 122.8 in · 3,120 mm | — |
| Width declared | 66.1 in · 1,680 mm | 61.0 in · 1,550 mm | +8% B-414 |
| Height declared | 60.2 in · 1,530 mm | 66.9 in · 1,700 mm | +11% R 35 |
| Ground clearance declared | 18.5 in · 470 mm | 13.8 in · 350 mm | +34% B-414 |
| Turning radius, braked declared | 10.2 ft · 3.10 m | 9.8 ft · 3.00 m | — |
| Fuel tank declared | 50.9 qt · 48.2 L | 31.7 qt · 30.0 L | +61% B-414 |
International Harvester B-414 sources
Source
- Source: Traktorenlexikon, “McCormick B-414”
- Source: Traktorenlexikon, “IHC B-414”
RÖHR R 35 sources
Source
- Source: Traktorenlexikon, “Röhr R 35”
- Source: Traktorenlexikon, “Titus U 35”