8 material differences · fewer than 12

Tractor oneInternational Harvester 8861976–1981No measured PTO figureTractor twoMassey Ferguson MF 10041978–1990No measured PTO figure

Which should you choose?

We will not advise between these two machines, because their unladen weight differs by more than 25% (30%); the drive differs (Two-wheel or four-wheel drive; 4WD). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

8 material differences · 6 fields identical or within 5%, which is not counted as material

International Harvester 886 and Massey Ferguson MF 1004, field by field
Field	886	MF 1004	Gap
Engine
Engine power, claimed claimed	86.8 hp	86.9 hp	—
Engine declared	INTERNATIONAL HARVESTER D-360	Perkins A 4.318.2	differs
Displacement declared	—	5.21 L	—
Maximum torque declared	261 lb·ft · 354 N·m	254 lb·ft · 344 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	—	Pedal-operated dry and air-cooled single-disc clutch	—
Hydraulics & hitch
Pump flow declared	12.0 gpm · 45.5 L/min	7.2 gpm · 27.3 L/min	+67% 886
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	11,740 lb · 5,325 kg	9,039 lb · 4,100 kg	+30% 886
Wheelbase declared	104.8 in · 2,662 mm	95.7 in · 2,432 mm	+9% 886
Length declared	165.0 in · 4,191 mm	162.2 in · 4,120 mm	—
Width declared	102.0 in · 2,591 mm	87.8 in · 2,230 mm	+16% 886
Height, over the cab declared	112.0 in · 2,845 mm	108.7 in · 2,760 mm	—
Ground clearance declared	13.0 in · 330 mm	16.3 in · 413 mm	+25% MF 1004
Turning radius, braked declared	11.5 ft · 3.51 m	14.9 ft · 4.55 m	+30% MF 1004
Fuel tank declared	199.7 qt · 189.0 L	153.2 qt · 145.0 L	+30% 886

International Harvester 886 sources

Source

Source: Traktorenlexikon, “IHC 886”

Massey Ferguson MF 1004 sources