International Harvester 885 (A) vs URSUS 912 / 914

9 material differences · fewer than 12

Tractor one

1981–1990

No measured PTO figure

Tractor two

1984–1998

No measured PTO figure

Which should you choose?

Read our verdict on the 885 (A) and the 912 / 914 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 7 fields identical or within 5%, which is not counted as material

International Harvester 885 (A) and URSUS 912 / 914, field by field
Field	885 (A)	912 / 914	Gap
Engine
Engine power, claimed claimed	78.9 hp	78.9 hp	—
Engine declared	INTERNATIONAL-HARVESTER DT-268	T.S.-MARTIN Z-8401.1	differs
Displacement declared	4.40 L	4.56 L	—
Maximum torque declared	201 lb·ft · 272 N·m	175 lb·ft · 237 N·m	+15% 885 (A)
Transmission
Top speed declared	15.5 mph · 25 km/h	16.2 mph · 26 km/h	—
Clutch declared	Pedal-operated dry Laycock single-disc clutch	Pedal-operated, hydraulic-dry ZTS-Martin single-disc clutch	differs
Hydraulics & hitch
Pump flow declared	—	11.9 gpm · 45.0 L/min	—
Pressure declared	2,698 psi · 186 bar	—	—
Three-point lift at ends declared	5,238 lb · 2,376 kg	8,611 lb · 3,906 kg	+64% 912 / 914
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	7,363 lb · 3,340 kg	8,874 lb · 4,025 kg	+21% 912 / 914
Wheelbase declared	88.2 in · 2,240 mm	93.9 in · 2,385 mm	+6% 912 / 914
Length declared	147.2 in · 3,740 mm	163.8 in · 4,160 mm	+11% 912 / 914
Width declared	75.6 in · 1,920 mm	77.6 in · 1,970 mm	—
Height declared	103.9 in · 2,640 mm	103.9 in · 2,640 mm	—
Ground clearance declared	12.2 in · 310 mm	13.6 in · 345 mm	+11% 912 / 914
Turning radius, braked declared	11.6 ft · 3.55 m	11.8 ft · 3.61 m	—
Fuel tank declared	118.3 qt · 112.0 L	95.1 qt · 90.0 L	+24% 885 (A)

Source

Source