12 material differences
Tractor oneInternational Harvester 885 (A)1981–1990No measured PTO figureTractor twoLandini 8560 L (DT) TL 40 N/M (TL-40 DT/M)1988–2000No measured PTO figure
Which should you choose?
Read our verdict on the 885 (A) and the 8560 L (DT) TL 40 N/M (TL-40 DT/M) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 885 (A) | 8560 L (DT) TL 40 N/M (TL-40 DT/M) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 78.9 hp | 78.9 hp | — |
| Engine declared | INTERNATIONAL-HARVESTER DT-268 | Perkins A 4.248 | differs |
| Displacement declared | 4.40 L | 4.07 L | +8% 885 (A) |
| Maximum torque declared | 201 lb·ft · 272 N·m | 208 lb·ft · 282 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% 8560 L (DT) TL 40 N/M (TL-40 DT/M) |
| Clutch declared | Pedal-operated dry Laycock single-disc clutch | Dry and air-cooled OMG double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 11.2 gpm · 42.3 L/min | — |
| Pressure declared | 2,698 psi · 186 bar | 2,756 psi · 190 bar | — |
| Three-point lift, at the coupling points declared | 5,238 lb · 2,376 kg | 4,630 lb · 2,100 kg | +13% 885 (A) |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 7,363 lb · 3,340 kg | 5,027 lb · 2,280 kg | +46% 885 (A) |
| Wheelbase declared | 88.2 in · 2,240 mm | 81.5 in · 2,070 mm | +8% 885 (A) |
| Length declared | 147.2 in · 3,740 mm | 140.6 in · 3,570 mm | — |
| Width declared | 75.6 in · 1,920 mm | 61.4–89.4 in · 1,560–2,270 mm | differs |
| Ground clearance declared | 12.2 in · 310 mm | 16.5 in · 420 mm | +35% 8560 L (DT) TL 40 N/M (TL-40 DT/M) |
| Turning radius, braked declared | 11.6 ft · 3.55 m | 10.9 ft · 3.33 m | +7% 885 (A) |
| Fuel tank declared | 118.3 qt · 112.0 L | 65.5 qt · 62.0 L | +81% 885 (A) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
International Harvester 885 (A) sources
- Source: Traktorenlexikon, “IHC 885 (XL)”
- Source: Traktorenlexikon, “IHC 884”
Landini 8560 L (DT) TL 40 N/M (TL-40 DT/M) sources
- Source: Traktorenlexikon, “Landini R 8560 L (DT)”
- Source: Traktorenlexikon, “Massey Ferguson MF 178”