International Harvester 884 vs VALMET 802/802-4
8 material differences · fewer than 12
Which should you choose?
Read our verdict on the 884 and the 802/802-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 8 fields identical or within 5%, which is not counted as material
| Field | 884 | 802/802-4 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 78.9 hp | 80.9 hp | — |
| Engine declared | INTERNATIONAL-HARVESTER DT-268 | VALMET 411 CS | differs |
| Displacement declared | 4.40 L | 4.40 L | — |
| Maximum torque declared | 201 lb·ft · 272 N·m | 226 lb·ft · 306 N·m | +13% 802/802-4 |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% 802/802-4 |
| Clutch declared | — | Dry Fichtel & Sachs double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 11.8 gpm · 44.6 L/min | 11.4 gpm · 43.0 L/min | — |
| Pressure declared | 2,698 psi · 186 bar | — | — |
| Three-point lift at ends declared | 5,238 lb · 2,376 kg | 6,393 lb · 2,900 kg | +22% 802/802-4 |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,787 lb · 2,625 kg | 7,802 lb · 3,539 kg | +35% 802/802-4 |
| Wheelbase declared | 88.8 in · 2,255 mm | 92.1 in · 2,339 mm | — |
| Length declared | 146.5 in · 3,720 mm | 151.2 in · 3,840 mm | — |
| Width declared | 78.7 in · 1,998 mm | 77.6 in · 1,971 mm | — |
| Height declared | 101.1 in · 2,568 mm | 98.4 in · 2,499 mm | — |
| Ground clearance declared | 12.2 in · 310 mm | 18.9 in · 480 mm | +55% 802/802-4 |
| Turning radius, braked declared | 11.6 ft · 3.55 m | 11.8 ft · 3.61 m | — |
| Fuel tank declared | 81.4 qt · 77.0 L | 95.1 qt · 90.0 L | +17% 802/802-4 |
International Harvester 884 sources
Source
- Source: Traktorenlexikon, “IHC 884”
VALMET 802/802-4 sources
Source
- Source: Traktorenlexikon, “Valmet 802”