10 material differences · fewer than 12
Tractor oneInternational Harvester 8841979–1981No measured PTO figureTractor twoLeyland 2821979–1981No measured PTO figure
Which should you choose?
Read our verdict on the 884 and the 282 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 884 | 282 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 78.9 hp | 81.9 hp | — |
| Engine declared | INTERNATIONAL-HARVESTER DT-268 | LEYLAND-MOTORS 4/98 TT | differs |
| Displacement declared | 4.40 L | 3.77 L | +17% 884 |
| Maximum torque declared | 201 lb·ft · 272 N·m | 207 lb·ft · 281 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% 282 |
| Clutch declared | — | Dry Borg and Beck double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 11.8 gpm · 44.6 L/min | 8.0 gpm · 30.2 L/min | +48% 884 |
| Pressure declared | 2,698 psi · 186 bar | — | — |
| Three-point lift, at the coupling points declared | 5,238 lb · 2,376 kg | 5,199 lb · 2,358 kg | — |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,787 lb · 2,625 kg | 6,795 lb · 3,082 kg | +17% 282 |
| Wheelbase declared | 88.8 in · 2,255 mm | 80.0 in · 2,032 mm | +11% 884 |
| Length declared | 146.5 in · 3,720 mm | 146.9 in · 3,730 mm | — |
| Width declared | 78.7 in · 1,998 mm | 80.3 in · 2,040 mm | — |
| Ground clearance declared | 12.2 in · 310 mm | 15.8 in · 402 mm | +30% 282 |
| Turning radius, braked declared | 11.6 ft · 3.55 m | 10.7 ft · 3.27 m | +9% 884 |
| Fuel tank declared | 81.4 qt · 77.0 L | 72.1 qt · 68.2 L | +13% 884 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
International Harvester 884 sources
Source
- Source: Traktorenlexikon, “IHC 884”
Leyland 282 sources
Source
- Source: Traktorenlexikon, “Leyland 282”