International Harvester 785 (A) vs VALMET 565/II

12 material differences

Tractor one

1981–1990

No measured PTO figure

Tractor two

1992–1997

No measured PTO figure

Which should you choose?

Read our verdict on the 785 (A) and the 565/II → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 5 fields identical or within 5%, which is not counted as material

International Harvester 785 (A) and VALMET 565/II, field by field
Field	785 (A)	565/II	Gap
Engine
Engine power, claimed claimed	75.9 hp	74.0 hp	—
Engine declared	INTERNATIONAL-HARVESTER D-246	VALMET 320 DS	differs
Displacement declared	4.03 L	3.30 L	+22% 785 (A)
Maximum torque declared	190 lb·ft · 258 N·m	203 lb·ft · 275 N·m	+7% 565/II
Transmission
Top speed declared	15.5 mph · 25 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry Laycock single-disc clutch	Dry LuK double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	—	14.5 gpm · 55.0 L/min	—
Pressure declared	2,698 psi · 186 bar	2,901 psi · 200 bar	+8% 565/II
Three-point lift at ends declared	4,608 lb · 2,090 kg	5,688 lb · 2,580 kg	+23% 565/II
Rear PTO speeds declared	540/1000 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	6,702 lb · 3,040 kg	6,834 lb · 3,100 kg	—
Wheelbase declared	88.2 in · 2,240 mm	88.8 in · 2,255 mm	—
Length declared	147.2 in · 3,740 mm	152.4 in · 3,870 mm	—
Width declared	75.6 in · 1,920 mm	79.9 in · 2,030 mm	+6% 565/II
Height declared	103.9 in · 2,640 mm	104.5 in · 2,655 mm	—
Ground clearance declared	15.6 in · 396 mm	18.1 in · 460 mm	+16% 565/II
Turning radius, braked declared	11.5 ft · 3.51 m	13.8 ft · 4.20 m	+20% 565/II
Fuel tank declared	118.3 qt · 112.0 L	77.1 qt · 73.0 L	+53% 785 (A)

Source

Source