International Harvester 784 vs VALMET 565/II

14 material differences

Tractor one

1977–1981

No measured PTO figure

Tractor two

1992–1997

No measured PTO figure

Which should you choose?

Read our verdict on the 784 and the 565/II → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

14 material differences · 3 fields identical or within 5%, which is not counted as material

International Harvester 784 and VALMET 565/II, field by field
Field	784	565/II	Gap
Engine
Engine power, claimed claimed	75.9 hp	74.0 hp	—
Engine declared	INTERNATIONAL-HARVESTER D-246	VALMET 320 DS	differs
Displacement declared	4.03 L	3.30 L	+22% 784
Maximum torque declared	159 lb·ft · 216 N·m	203 lb·ft · 275 N·m	+27% 565/II
Transmission
Top speed declared	15.5 mph · 25 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	—	Dry LuK double clutch	—
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	10.1 gpm · 38.2 L/min	14.5 gpm · 55.0 L/min	+44% 565/II
Pressure declared	2,698 psi · 186 bar	2,901 psi · 200 bar	+8% 565/II
Three-point lift at ends declared	4,608 lb · 2,090 kg	5,688 lb · 2,580 kg	+23% 565/II
Rear PTO speeds declared	540/1000 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	5,238 lb · 2,376 kg	6,834 lb · 3,100 kg	+30% 565/II
Wheelbase declared	88.0 in · 2,235 mm	88.8 in · 2,255 mm	—
Length declared	144.1 in · 3,660 mm	152.4 in · 3,870 mm	+6% 565/II
Width declared	68.9 in · 1,750 mm	79.9 in · 2,030 mm	+16% 565/II
Height declared	100.4 in · 2,550 mm	104.5 in · 2,655 mm	—
Ground clearance declared	15.6 in · 396 mm	18.1 in · 460 mm	+16% 565/II
Turning radius, braked declared	11.5 ft · 3.51 m	13.8 ft · 4.20 m	+20% 565/II
Fuel tank declared	81.4 qt · 77.0 L	77.1 qt · 73.0 L	+5% 784

Source

Source