International Harvester 475 vs VALMET 504
10 material differences · fewer than 12
Which should you choose?
Read our verdict on the 475 and the 504 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | 475 | 504 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 58.2 hp | 49.3 hp | +18% 475 |
| Engine declared | Perkins A 4.212 | VALMET D 27 B | differs |
| Displacement declared | 3.47 L | 2.69 L | +29% 475 |
| Maximum torque declared | 131 lb·ft · 178 N·m | 125 lb·ft · 170 N·m | — |
| Transmission | |||
| Top speed declared | 12.4–18.6 mph · 20–30 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | Pedal-operated dry Laycock single-plate clutch | dry Fichtel & Sachs dual clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 10.1 gpm · 38.2 L/min | 7.1 gpm · 27.0 L/min | +41% 475 |
| Three-point lift at ends declared | 3,911 lb · 1,774 kg | 3,957 lb · 1,795 kg | — |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,655 lb · 2,565 kg | 5,930 lb · 2,690 kg | — |
| Wheelbase declared | 84.5 in · 2,146 mm | 83.1 in · 2,112 mm | — |
| Length declared | 135.0 in · 3,430 mm | 142.4 in · 3,617 mm | +5% 504 |
| Width declared | 64.2 in · 1,630 mm | 74.4 in · 1,890 mm | +16% 504 |
| Height declared | 59.4 in · 1,510 mm | 98.4 in · 2,500 mm | +66% 504 |
| Ground clearance declared | 16.0 in · 406 mm | 15.7 in · 400 mm | — |
| Turning radius, braked declared | 11.1 ft · 3.37 m | 11.5 ft · 3.50 m | — |
| Fuel tank declared | 81.7 qt · 77.3 L | 68.7 qt · 65.0 L | +19% 475 |
International Harvester 475 sources
Source
- Source: Traktorenlexikon, “IHC 475”
- Source: Traktorenlexikon, “Massey Ferguson MF 165 S”
VALMET 504 sources
Source
- Source: Traktorenlexikon, “Valmet 504”