International Harvester 475 vs SAME Falcon 50

14 material differences

Tractor one

1974–1975

No measured PTO figure

Tractor two

1974–1987

No measured PTO figure

Which should you choose?

Read our verdict on the 475 and the Falcon 50 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

14 material differences · 1 fields identical or within 5%, which is not counted as material

International Harvester 475 and SAME Falcon 50, field by field
Field	475	Falcon 50	Gap
Engine
Engine power, claimed claimed	58.2 hp	49.3 hp	+18% 475
Engine declared	Perkins A 4.212	SAME DA 03544-983 L	differs
Displacement declared	3.47 L	2.72 L	+28% 475
Maximum torque declared	131 lb·ft · 178 N·m	125 lb·ft · 170 N·m	—
Transmission
Top speed declared	12.4–18.6 mph · 20–30 km/h	15.5 mph · 25 km/h	differs
Clutch declared	Pedal-operated dry Laycock single-plate clutch	Pedal operated dry two stage double clutch with coil springs	differs
Hydraulics & hitch
Pump flow declared	10.1 gpm · 38.2 L/min	4.8 gpm · 18.0 L/min	+112% 475
Three-point lift at ends declared	3,911 lb · 1,774 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	5,655 lb · 2,565 kg	4,365 lb · 1,980 kg	+30% 475
Maximum permissible mass declared	—	7,606 lb · 3,450 kg	—
Wheelbase declared	84.5 in · 2,146 mm	73.2 in · 1,860 mm	+15% 475
Length declared	135.0 in · 3,430 mm	125.2 in · 3,180 mm	+8% 475
Width declared	64.2 in · 1,630 mm	73.2 in · 1,860 mm	+14% Falcon 50
Height declared	59.4 in · 1,510 mm	89.4 in · 2,270 mm	+50% Falcon 50
Ground clearance declared	16.0 in · 406 mm	14.2 in · 360 mm	+13% 475
Turning radius, braked declared	11.1 ft · 3.37 m	10.3 ft · 3.15 m	+7% 475
Fuel tank declared	81.7 qt · 77.3 L	47.6 qt · 45.0 L	+72% 475

Source

Source