International Harvester 464 vs Steyr 8060 (a)

10 material differences · fewer than 12

Tractor one

1973–1978

No measured PTO figure

Tractor two

1979–1992

No measured PTO figure

Which should you choose?

Read our verdict on the 464 and the 8060 (a) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 4 fields identical or within 5%, which is not counted as material

International Harvester 464 and Steyr 8060 (a), field by field
Field	464	8060 (a)	Gap
Engine
Engine power, claimed claimed	44.4 hp	47.3 hp	+7% 8060 (a)
Engine declared	INTERNATIONAL-HARVESTER D-179	Steyr WD-311.41 or WD-311.87	differs
Displacement declared	2.93 L	2.59 L	+13% 464
Maximum torque declared	132 lb·ft · 179 N·m	—	—
Transmission
Top speed declared	22.4 mph · 36 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	—	Dry Fichtel & Sachs double clutch	—
Hydraulics & hitch
Pump flow declared	12.0 gpm · 45.4 L/min	6.4 gpm · 24.1 L/min	+88% 464
Pressure declared	—	3,553 psi · 245 bar	—
Three-point lift at ends declared	3,307 lb · 1,500 kg	4,850 lb · 2,200 kg	+47% 8060 (a)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	5,130 lb · 2,327 kg	5,335 lb · 2,420 kg	—
Wheelbase declared	75.2 in · 1,910 mm	80.1 in · 2,035 mm	+7% 8060 (a)
Length declared	133.0 in · 3,378 mm	137.6 in · 3,495 mm	—
Width declared	66.0 in · 1,676 mm	67.3 in · 1,710 mm	—
Height declared	55.0 in · 1,397 mm	92.9 in · 2,360 mm	+69% 8060 (a)
Ground clearance declared	12.4 in · 315 mm	14.2 in · 360 mm	+14% 8060 (a)
Turning radius, braked declared	9.2 ft · 2.79 m	10.6 ft · 3.24 m	+16% 8060 (a)
Fuel tank declared	74.0 qt · 70.0 L	101.4 qt · 96.0 L	+37% 8060 (a)

Source

Source